2711-K10G20L1

Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.

Product comes with Urgent Automation's 1-year warranty.

Rated 4.8 with 11 reviews

Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


2711-K10G20L1

Description: The 2711-K10G20L1 is a Human Machine Interface (HMI) device that belongs to the Allen-Bradley PanelView Standard Operator Terminals. This terminal is a legacy product which comes with a monochrome 10-inch screen size, Keypad operator interface with built-

Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.

Product comes with Urgent Automation's 1-year warranty.


Description: The 2711-K10G20L1 is a Human Machine Interface (HMI) device that belongs to the Allen-Bradley PanelView Standard Operator Terminals. This terminal is a legacy product which comes with a monochrome 10-inch screen size, Keypad operator interface with built-


Rated 4.8 with 11 reviews







About 2711-K10G20L1

The 2711- K10G20L1 is a Direct Current (DC) powered Human Machine Interface (HMI) product from Allen-Bradley. It is used to enable active interaction between operator and the process. Typically installed in the plant floor area as an important component of process automation, the product may also be used as a bridge to the supervisor and enterprise level. The product belongs to the 2711 PanelView 1000 Standard Operator Terminal. The HMI hardware is a legacy product discontinued on 12/31/2012. The 2711- K10G20L1 supports replacement and component add on. Pre-installed components such as HMI screen, keypad interface and communication port makes the HMI hardware ready for implementing modern visualization and effective, accurate controls Add-on components such as anti-glare overlays is used to improve screen visualization, function key legend insert to serve as button function description and ATA cards to increase the non-volatile memory. The built-in communication port can be partnered with an external Allen-Bradley device to be able to communicate with larger networks or other protocols. It has a 10-inch monochrome screen. It has a resolution of 640 x 480 and display area of 211 x 158 mm (8.3 x 6.2 in.). The Keypad has Sixteen function keys that is designed to be actuated up to 1 million presses. Each button in the keypad can be individually assigned to different task. The Ethernet communication port enables communication to partner automation devices in the plant floor area. It can operate with data transfer speed up to 5Mbps and maximum distance of 100 meters. A power supply capable of producing 18-32VDC may be used to power the terminal. When installing the terminal, ensure that the designated panel cut-out is observed. The panel cutout for K10G20L1 is 257 mm x 338 mm (10.11 in. x 13.29 in.). Observe 2-inch clearance to all sides of the terminal for air flow, wiring and insertion of add-on components.

Technical specifications:


Manufacturer: Rockwell Automation
Brand: Allen-Bradley
Part Number: 2711-K10G20L1
Product Family: PanelView Standard Terminals
Product TypeOperator Terminals
Operator Input: Keypad
Display Type: Monochrome LCD blue mode display
Display Area: 211 x 158 mm (8.3 x 6.2 in.)
Resolution:640 x 480
310 KB application runtime; 1008 KB nonvolatile memory Actuation: 2 million presses
Communication ports:Ethernet I/P; RS232 (printer)
Manufacturer: Rockwell Automation
Brand: Allen-Bradley
Part Number: 2711-K10G20L1
Product Family: PanelView Standard Terminals
Product TypeOperator Terminals
Operator Input: Keypad
Display Type: Monochrome LCD blue mode display
Display Area: 211 x 158 mm (8.3 x 6.2 in.)
Resolution:640 x 480
310 KB application runtime; 1008 KB nonvolatile memory Actuation: 2 million presses
Communication ports:Ethernet I/P; RS232 (printer)
Common misspellings:
  • 27l1-K10G20L1
  • 271l-K10G20L1
  • 2711-Kl0G20L1
  • 2711-K1oG20L1
  • 2711-K10G2oL1
  • 2711-K10G2011
  • 2711-K10G20Ll