UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More
Some of the products sold by UrgentAutomation may come with firmware installed on them. UrgentAutomation makes no representation as to your ability or right to download, obtain, or use any firmware provided by the product's manufacturer. To the extent you wish to use such firmware, it is your responsibility to comply with the terms of any applicable license or other such agreement related to the download, installation, or use of the firmware. UrgentAutomation makes no representation that the version of the firmware that is installed on any product it sells is appropriate for your needs or use. Further, UrgentAutomation does not sell, re-sell, or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. To the extent any of the products sold by UrgentAutomation requires software for operation, you acknowledge that UrgentAutomation does not sell or license such software and that it is solely your responsibility to obtain the software or a proper license to use it from authorized sources. Read less
The Eaton Cutler-Hammer D100ENA8 is an 8 I/O expansion module from the D100 series of PLCs. This expansion module is the smallest one in a wide range of Cutler-Hammer D100 series expansion modules which allows the user to set up an individual configuration. The maximum of two expanding modules is permitted for series D100 PLCs to implement. The D100ENA8 is used for expanding base architecture in applications that already include PLCs, in this case for 8 digital inputs 115 Volts AC rated. Inputs rated voltage is externally supplied. Every input state is signaled over a red lamp on the module’s housing. For powering purpose of this expansion module, supply a 115 Volts AC voltage at its power input. The D100ENA8 comes with an 80-millimeter long connecting cable.
Installation note: If intending to connect an analog expansion module to the PLC system, it must be installed next to the controller before the D100ENA8 expansion module. Addresses on the D100ENA8 expansion module are increasing in an octal number sequence starting from final address from the PLC or starting from final address from expansion module installed in front of this module. The D100ENA8 is designed to operate in an industrial surrounding with ambient temperature conditions in 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit) range. The expansion module weight is around 0.5 kilograms (1 pound). The dimensions of this expansion chassis are around 5.32 x 4.00 x 4.4 inches (135 x 100 x 112 millimeters). Mount the module directly to the panel or onto a DIN rail; cable connectors on the chassis are protected with covers. Remove the cover to plug in the connection cable and keep the connecting cable path as short as possible.