About HVX007A2-4A1B1

The HVX007A2-4A1B1 is part of the Eaton Cutler-Hammer HXV 9000 Drive series, providing industrial-grade performance and adequate control over numerous compatible motors. The device is used to deliver sufficient power to motor coils of connected devices, and to offer fast and convenient power switching features from the Hammer Drive toward the motor coil. The HVX007A2-4A1B1 provides a variable frequency setting, onboard programming features, and versatile configuration options, allowing for the installation in different hardware settings. The HVX007A2-4A1B1 drive provides several safety additions for an optimal performance that reduces the risk of hazards in the operational environment, while also ensuring all connected devices can be controlled based on the requirements of the particular project involved. The device requires an input voltage rating of 480 Volts AC and provides a max output voltage of 480 Volts AC, which can be configured depending on the hardware requirements. Maximum current output configuration can be set up to 12 Amps. The three-phase input feature provided by the HVX007A2-4A1B1 ensures more flexible compatibility with external motors. The device does not offer a Bypass or Line Contractor feature. Both input and output power features are set to three-phase. Numerous settings can be adjusted to ensure this drive delivers adequate power output and settings to the motor connected to the device, and to ensure operational faults do not occur due to inappropriate control features.

An LCD display has been included in the HVX007A2-4A1B1 allows the user to adjust different configurations, including a variable frequency setting, which can be set to a voltage output between 380 Volts and 500 Volts. The acceleration time of the drive can also be configured between 0 and 3000 seconds, and the deceleration time is also adjustable between 0 and 3000 seconds. Other control options include a Dynamic Braking feature, with an internal Brake Chopper Circuit unit, pre-installed on the Drive. The device has a footprint of 12.9 inches in height, 7.5 inches in depth, and a 5-inch width. This provides for compact installation, yet adequate power features and control options to suit most hardware requirements.

Technical specifications: