UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More
Some of the products sold by UrgentAutomation may come with firmware installed on them. UrgentAutomation makes no representation as to your ability or right to download, obtain, or use any firmware provided by the product's manufacturer. To the extent you wish to use such firmware, it is your responsibility to comply with the terms of any applicable license or other such agreement related to the download, installation, or use of the firmware. UrgentAutomation makes no representation that the version of the firmware that is installed on any product it sells is appropriate for your needs or use. Further, UrgentAutomation does not sell, re-sell, or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. To the extent any of the products sold by UrgentAutomation requires software for operation, you acknowledge that UrgentAutomation does not sell or license such software and that it is solely your responsibility to obtain the software or a proper license to use it from authorized sources. Read less
The Eaton / Cutler-Hammer HVX075A1-4A1N1 is an adjustable frequency drive that operates at a maximum horsepower of 75.0 HP. The HVX075A1-4A1N1 is meant to be used with 3-phase inverter duty motors. The drive measures 24.8 inches high, 9.3 inches wide, and 10.1 inches depth. The HVX075A1-4A1N1 has an Input/Output voltage rating of 480 volts Alternating Current, a maximum output current of 105 amperes, and a 100 percent starting torque at a frequency of 1 Hertz. The HVX075A1-4A1N1 has an input frequency of 50 to 60 Hertz, an output frequency rating of between 0 and 320 Hertz, and a variable acceleration/deceleration time that ranges from 0 to 50 minutes. The stop and start options for the HVX075A1-4A1N1 adjustable frequency drive are programmable. This drive is controlled through frequency control open loop sensorless vector control; additionally, the HVX075A1-4A1N1 can bear an input signal (control) that has a voltage ranging from 0 to 10 Volts DC and a current that does not exceed 20 milliamperes and does not fall below 4 milliamperes. To prepare the module for the harsh industrial environment, the drive has a motor stall, motor over/under load, excess temperature, earth fault, under/over voltage, input/motor phase, and excess current protection.
The HVX075A1-4A1N1 should be installed in an enclosure that meets NEMA type 1/IP21, although a NEMA type 12/IP54 enclosure can also be used. The adjustable frequency drive is UL-508C safety certified. For optimum performance of the HVX075A1-4A1N1, it should be operated at an altitude not exceeding 3280 feet. If the altitude is exceeded, derating occurs for every 328 feet above 3280 feet. Even when exceeding, the operating altitude should not reach 9842 feet. The HVX075A1-4A1N1 also features a NEMA Type 12 keypad and LCD display for monitoring and troubleshooting. The HVX075A1-4A1N1, as with other cutler hammer variable frequency drives that fall under the HVX900 series, is meant to be used in fluid and pump control applications. Additionally, the drive can be used for Heating, Ventilation and Air Conditioning (HVAC).