92-00988-02

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.

Rated 4.8 with 26 reviews

UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More


92-00988-02

Description: Eaton PANELMATE OPERATOR INTERFACE KEYBOARDS Cutler-Hammer

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.


Description: Eaton PANELMATE OPERATOR INTERFACE KEYBOARDS Cutler-Hammer


Rated 4.8 with 26 reviews







About 92-00988-02

The 92-00988-02 is an operator interface keyboard from Eaton Cutler-Hammer and from the PanelMate 1000 series. During installation, the 92-00988-02 should be protected from dust, moisture, corrosive vapors, and other contaminants. The operating ambient temperature around the device should be between 0 and 50 degrees Celsius and the humidity of the environment should be non-condensing between 20 and 95%. The temperature around the device should be maintained within the limits to ensure proper operation of the device. Users can install cooling fans to maintain the temperature if the temperature goes above the limits. If the temperature goes below the limit, it is recommended to install a heater to increase the temperature within the specified limits. Proper heat dissipation measures are necessary for longer life expectancy for the machine.

Make sure the fans are clean and the vents are not covered in dust. It is advised to clean the dust out from time to time. The device should be installed with the minimum clearances as mentioned by the manufacturer to maintain the temperatures.  When installing the 92-00988-02, follow the guidelines mentioned by the manufacturer in the installation manuals and follow the safety guidelines mentioned. It is necessary to follow the electrostatic discharge guidelines to prevent damage to the equipment due to electrostatic discharge. The 92-00988-02 must be installed away from transformers, relays, motor starters and high-voltage equipment to prevent any induced noise from electrical wiring. The device should be installed by people who are trained with the equipment and who are familiar with the system to protect the device and prevent any damage to the other connected systems.


Technical specifications:


ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Common misspellings:
  • 92-o0988-02
  • 92-0o988-02
  • 92-009b8-02
  • 92-0098b-02
  • 92-00988-o2