About 7685T-12

The 7685T-12 is a 12-inch TFT display belonging to the PanelMate ePro PS series from Eaton Corporation. The PanelMate ePro PS family is comprised of high-performance operator interface products. The ePro PS family of products is configured with the Canvas® editing software which supports a suite of graphical templates called controls for replacing hardwired panel devices such as pushbuttons, indicator lights, bars, readouts, message displays, etc. In addition to a PanelMate ePro PS display unit, the package comes with an accessory kit that includes the following: one panel mounting hardware kit, one 3-pin power connector, one PanelMate ePro PS support CD, and three spare jumpers used to configure serial ports.

The 7685T-12 requires 24V DC power at 1.5 A. Use of #18 AWG (0.82 mm2) copper wire is recommended for the power and the ground lead connections.

The display is a resistive touchscreen that supports 16 million colors. The supported resolution is SVGA (800 x 600) and the brightness of the display is 450 nits. The backlight is replaceable and has a typical life of 50,000 hours. It can auto-dim.

The 7685T-12’s system memory includes 512MB of DDR2 RAM with 1GB of internal CompactFlash memory (C and D drive). A CompactFlash slot is available in the unit. The 7685T-12 must be powered off before the CompactFlash memory card is removed or inserted (hot-swapping is not supported). Failure to do so may damage the CompactFlash memory card and/or processor board. The 7685T-12 PanelMate ePro PS uses Windows XPE, which is a subset of Windows XP Professional. The XPE system enables the  PanelMate ePro PS unit’s operating system (OS) to be customized by eliminating unneeded operating system components. The result is a smaller, more streamlined, and more efficient machine.

PCMCIA slots which support up to 2 Type II cards or 1 Type III card are available. Before PCMCIA cards are hot-swapped, make sure that the card supports hot-swapping.
The 7685T-12 supports the following integrated IO interfaces: 4 USB v2.0 ports, 1 10/100 Ethernet port, 1 RS-232/422/485 serial port (COM1), 1 RS-232 serial port (COM 2) and 1 VGA port for video output. The COM1 port can be configured to support RS232, RS422, or RS485 by configuring jumper settings on the board (the board can be accessed by removing the back cover of the unit). The 7685T-12 can communicate with a PLC or controller via the following interfaces: a serial connection, an Ethernet connection, or an optional interface card.

The range of operating temperature is from 32 – 140 oF (0 – 60oC). The maximum heat dissipation during operation is 35W. The dimensions of the unit are 295 x 404 x 99 mm. It weighs 5.91 Kg.

Technical specifications: