S801U36N3S

Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.

Product comes with Urgent Automation's 1-year warranty.

Rated 4.6 with 9 reviews

Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


S801U36N3S

Description: The Eaton S801U36N3S Non-combination Open Soft Starter operates with 360 Amps and a 47-63 Hz Operating Frequency. It has 3 Poles and No option.

Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.

Product comes with Urgent Automation's 1-year warranty.


Description:

The Eaton S801U36N3S Non-combination Open Soft Starter operates with 360 Amps and a 47-63 Hz Operating Frequency. It has 3 Poles and No option.




Rated 4.6 with 9 reviews







About S801U36N3S

The Eaton Cutler-Hammer S801U36N3S non-combination soft starter is an industrial multifunction reduced voltage soft starter form the S801 series of soft starters that are designed to start, ramp up, and stop 3-phase motors. This starter features a very compact design that allows for easy and simple field retrofitting, and it also features built-in overload protection, programmable overload settings, and built-in run bypass contactors for the control of the inrush current and reduction of the wear on belts, gears, chains, clutches, shafts, and bearings. The S801U36N3S soft starter has a 3-phase operational voltage range of 200 to 600 Volts AC at 47 to 63 Hertz frequency and a maximum current capacity of 360 Amps. It has a standard duty Horsepower rating of 125 Horsepower at 60 Hertz, and a standard ramp time range of 0.5 seconds to 180 seconds.

The S801U36N3S soft starter has an average bypass time of 10 minutes, with 660 Volts AC rated insulation voltage and an overload setting range between 30% and 100% of the full current.  All S801 non-combination soft starters, including the S801U36N3S soft starter, come with 24 Volts DC control voltage that helps to enhance user and equipment safety, and they have 1 relay contact with a 240 Volts AC contactor rating. The S801U36N3S soft starter has a control interface module that allows for easy configuration, which reduces the commissioning time. It has 3-pole wiring and it requires lead add-on lugs for easy field wiring and installation processes. The S801U36N3S soft starter has an operating temperature range of -30 to 50 degrees Celsius, and a storage temperature range between -50 and 70 degrees Celsius. The S801U36N3S soft starter has total mounting dimensions of 196.3 x 323.1 x 179.9 millimeters (W x H x D), and an approximate weight of 21.8 kilograms.


Technical specifications:


ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part NumberS801U36N3S
Product TypeOpen Soft Starter
SeriesS801
Soft Starter TypeNon-combination
Amps360
OptionNo
Poles3
TypeStandard
Operating Frequency47-63 Hz
Insulating voltage (Ui)660V
Bypass mechanical lifespan10M
Voltage AC240 max.
Voltage DC120 max.
ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part NumberS801U36N3S
Product TypeOpen Soft Starter
SeriesS801
Soft Starter TypeNon-combination
Amps360
OptionNo
Poles3
TypeStandard
Operating Frequency47-63 Hz
Insulating voltage (Ui)660V
Bypass mechanical lifespan10M
Voltage AC240 max.
Voltage DC120 max.
Common misspellings:
  • Sb01U36N3S
  • S8o1U36N3S
  • S80lU36N3S