Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The Eaton S811R10N3S Open Soft Starter operates with 10 Amps, a 200-600V Operating Voltage, and a 47-63 Hz Operating Frequency. It has a 110 mm Frame Size and Standard Features.
The Eaton Cutler-Hammer S811R10N3S open soft starter is a solid-state device used for motor starting. This soft starter has a 200 to 600 Volts AC power supply, a maximum current capacity of 105 Amps, and a 24 Volts DC control power rating. Its internal processor calculates the voltage and current that are needed at the output to start a 3-phase induction motor according to the users’ pre-set parameters. The S811R10N3S soft starter is a compact device that is built to save installation space and to reduce the heat generated in its internal circuits by using the contactor-executable bypass system. This soft starter is assembled with advanced industrial automation needs. This is why the device is equipped with 2 QCPort communication ports, the remote network port (channel 0) and the local port (channel 1).
When operational, the Eaton S811R10N3S soft starter delivers special motor overload protection with 30 to 100% of the rated current trip setting (programmable by the users). The controller also offers DC voltage level monitoring, stall protection, and jam detection. Over an HMI with an LCD, the soft starter provides information on preventive maintenance, active alarms, and the data collected with a metering system which records the power parameters. The S811R10N3S soft starter is a 110-millimeter framed soft starter that has a non-derating operating temperature range of -30 to 50 degrees Celsius. In the back lower part of the device, there is an internal fan that makes sure that this motor starter does not get overheated. Be sure that the motor’s horsepower ratings and voltage ratings (these are available on the nameplate of the motor) are compatible with the soft starter’s horsepower and voltage ratings before ordering and installing the S811R10N3S soft starter.
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Part Number | S811R10N3S |
| Product Type | Open Soft Starter |
| Frame Size | 110 mm |
| Amps | 10 |
| Option | No |
| Features | Standard |
| 230V AC Hp Rating | 40 |
| Max. Current Capacity | 105 |
| Insulating Voltage Ui | 660 V AC |
| Operating Voltage | 200-600V AC |
| Operating Frequency | 47-63 Hz |
| Resistance to Shock | 15g |
| Bypass Mechanical Lifespan | 10M |
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Part Number | S811R10N3S |
| Product Type | Open Soft Starter |
| Frame Size | 110 mm |
| Amps | 10 |
| Option | No |
| Features | Standard |
| 230V AC Hp Rating | 40 |
| Max. Current Capacity | 105 |
| Insulating Voltage Ui | 660 V AC |
| Operating Voltage | 200-600V AC |
| Operating Frequency | 47-63 Hz |
| Resistance to Shock | 15g |
| Bypass Mechanical Lifespan | 10M |