UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More
Some of the products sold by UrgentAutomation may come with firmware installed on them. UrgentAutomation makes no representation as to your ability or right to download, obtain, or use any firmware provided by the product's manufacturer. To the extent you wish to use such firmware, it is your responsibility to comply with the terms of any applicable license or other such agreement related to the download, installation, or use of the firmware. UrgentAutomation makes no representation that the version of the firmware that is installed on any product it sells is appropriate for your needs or use. Further, UrgentAutomation does not sell, re-sell, or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. To the extent any of the products sold by UrgentAutomation requires software for operation, you acknowledge that UrgentAutomation does not sell or license such software and that it is solely your responsibility to obtain the software or a proper license to use it from authorized sources. Read less
The Eaton S811T30N3S Open Soft Starter operates with 30 Amps, a 200-600V Operating Voltage, and a 47-63 Hz Operating Frequency. It has a 200 mm Frame Size and Standard Features.
The Eaton Cutler-Hammer S811T30N3S motor starter is a reduced voltage solid-state motor starter. It can apply a 3-phase soft start in applications such as pump, rock crusher, wood chipper, conveyor, compressor, and bread mixer applications. The S811T30N3S motor starter has a 200-millimeter frame size, and it belongs to the Eaton Intelligent Technology series of motor starters called the S811 series. The unit can be upgraded with MOVs (Metal Oxide Varistors or surge suppressors) that can be mounted on the line side or on the load side of the motor starter. The device can be positioned either horizontally or vertically, but there should be enough clearance (about 4 inches) around the soft starter for good air circulation.
The Eaton S811T30N3S motor starter has a current rating of 304 Amps and it requires a 200 to 600 Volts AC 3-phase power supply. It can digitally send information over relay outputs. Relay 1 is a Form A normally-open contact that closes when the bypass contactor is powered. This signal remains closed until the soft-stop is initiated. Relay 2 is a Form C normally-open contact that is programmed to close when there is a fault condition. The S811T30N3S motor starter can be programmed to act in a certain way in the case of a trip situation. It can be adjusted to automatically reset the trip as soon as the trip condition is no longer present. The other option is to configure the device to work in the manual reset mode. In this case, the operator must press the RESET button on the control panel of the unit to clear an alarm. The digital inputs on the unit are 24 Volts DC rated.