Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The Eaton S811V42N3S Open Soft Starter operates with 42 Amps, a 200-600V Operating Voltage, and a 47-63 Hz Operating Frequency. It has a 290 mm Frame Size and Standard Features.
The Eaton S811V42N3S soft starter is a 3-pole none-combination soft starter which is part of the Eaton S811 product line. Starters belonging to the S811 series include all the features of the starters in the S801 series and they also support communications capabilities and digital interface modules. The S811 series S811V42N3S soft starter is compact and easy to program and it is designed to manage the acceleration and deceleration of 3-phase motors at up to 690 Volts AC. The S811 series supports current ratings from a minimum 11 Amps to a maximum of 1000 Amps. The frame size of the S811V42N3S soft starter is 290 millimeters and it is rated for 420 Amps of current. This device is a standard soft starter with an edge sensing feature that is set to the default selectable setting. The starter is a complete package and includes the SCRs and overload and bypass contactors inside 1 compact unit.
The S811V42N3S soft starter can be mounted on a panel or inside motor control centers. The digital interface module available on the S811V42N3S soft starter allows for easy device configuration. The LCD and keypad on the interface module enable the users to configure the control parameters and monitor the system parameters and faults. Electronic overload protection on the S811V42N3S soft starter protects it from overheating. Jam protection is enabled when a current more than 300% FLA causes the starter to trip and it protects the device from stress and the damage caused by a jam during normal operations. Stall protection prevents motor damage and stress in situations where the motor has not been able to reach the desired speed or has stalled. The phase loss protection feature trips the S811V42N3S soft starter if 1 of the 3 phases is lost to prevent extra load and current draw on the remaining two phases.
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Part Number | S811V42N3S |
| Product Type | Open Soft Starter |
| Frame Size | 290 mm |
| Amps | 42 |
| Option | No |
| Features | Standard |
| 230V AC Hp Rating | 175 |
| Max. Current Capacity | 420 |
| Insulating Voltage (Ui) | 660V AC |
| Operating Voltage | 200-600V AC |
| Operating Frequency | 47-63 Hz |
| Resistance to Shock | 15G |
| Bypass Mechanical Lifespan | 10M |
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Part Number | S811V42N3S |
| Product Type | Open Soft Starter |
| Frame Size | 290 mm |
| Amps | 42 |
| Option | No |
| Features | Standard |
| 230V AC Hp Rating | 175 |
| Max. Current Capacity | 420 |
| Insulating Voltage (Ui) | 660V AC |
| Operating Voltage | 200-600V AC |
| Operating Frequency | 47-63 Hz |
| Resistance to Shock | 15G |
| Bypass Mechanical Lifespan | 10M |