Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The ED2040 is a thermal-magnetic circuit breaker that belongs to Series C of the Eaton circuit breakers. This breaker has been designed by Eaton Cutler-Hammer in order to provide the best protection to all kinds of circuits, including industrial ones. The Eaton Cutler-Hammer ED2040 thermal-magnetic circuit breaker has been designed with a combination of 2 mechanisms that can assure the quick detection and interruption of abnormal current lines that could cause serious damage to the whole circuit and the equipment attached to it. The Eaton Cutler-Hammer ED2040 thermal-magnetic circuit breaker operates with a voltage line class of 125 Volts DC or 240 Volts AC and a frequency of 50 to 60 Hertz.
The Eaton Cutler-Hammer ED2040 thermal-magnetic circuit breaker has a maximum amperage rating of 40 Amps. This amperage has been previously tested in open air environments. At the moment of calibration, the maximum ambient air temperature for its 100% rating is 40 degrees Celsius. There is the possibility of derating the Eaton Cutler-Hammer ED2040 thermal-magnetic circuit breaker if it is going to be used at a higher ambient air temperature or if the breaker is going to be installed in an enclosure. This occurs because this device is very sensitive to high temperatures and these directly affect its functioning. The most common recommendation is to find an enclosure with a good ventilation method in order to release heat in an efficient way. Once a fault has been detected, it is recommended to clear and correct the fault and start the breaker immediately so it can offer a high level of protection.
| Part Number/Catalog No. | ED2040 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 2 |
| Interrupting Capacity | 65 kAIC at 240 Volts AC |
| Weight | 3 pounds |
| Trip Unit | Thermal-Magnetic |
| Dimensions | 2.75 x 6 x 3.38 inches |
| Part Number/Catalog No. | ED2040 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 2 |
| Interrupting Capacity | 65 kAIC at 240 Volts AC |
| Weight | 3 pounds |
| Trip Unit | Thermal-Magnetic |
| Dimensions | 2.75 x 6 x 3.38 inches |