Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The Eaton EDB2125 is a complete ED type of circuit breaker which is UL certified. The EDB2125 has a current rating of 125 Amps and a voltage rating of 240 Volts AC/125 Volts DC. The frequency rating for the circuit breaker is 50/60 Hertz. The interrupt ratings for the breaker are 22 kAIC at 240 Volts AC and 125 kAIC at 125 Volts DC. The EDB2125 is a 2-pole breaker. It has a built-in fixed thermal/fixed magnetic trip unit and this includes the load side terminals. A joint compound is recommended to be used with aluminum terminals to prevent terminal overheating (which could lead to random breaker tripping and damage to the circuit breaker). To satisfy the UL standards, the internal accessories are installed at the factory and then the breaker is sealed to prevent tampering. Field installation of accessories can be done where local codes and regulations permit the practice.
Prior to installation, the nameplate specifications of the circuit breaker should be compared with system requirements to confirm suitability. To protect technicians from serious injury and death and to prevent equipment damage, the maintenance and installation of the EDB2125 should only be performed when the circuit breaker is in the off state. The installation process comprises inspecting the circuit breaker for damage, mounting it, and then connecting the line and load terminations. The EDB2125 is available in an F-frame. Its approximate weight is 3 pounds and its dimensions are 6 x 2.75 x 3.38 inches.
| Part Number/Catalog No. | EDB2125 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 2 |
| Interrupting Capacity | 22 kAIC at 240 Volts AC |
| Weight | 3 pounds |
| Trip Unit | Thermal-Magnetic |
| Dimensions | 2.75 x 6 x 3.38 inches |
| Part Number/Catalog No. | EDB2125 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 2 |
| Interrupting Capacity | 22 kAIC at 240 Volts AC |
| Weight | 3 pounds |
| Trip Unit | Thermal-Magnetic |
| Dimensions | 2.75 x 6 x 3.38 inches |