Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The EDH2175 is a molded case circuit breaker manufactured by Eaton Cutler-Hammer. The Cutler-Hammer EDH2175 circuit breaker is part of Series C of the EDH Type of molded case circuit breakers. The Cutler-Hammer EDH2175 circuit breaker features 175 Amps of current rating at 40 degrees Celsius, 240 Volts AC voltage, 2 poles, 125 Volts DC voltage, 10 kAIC at 125 Volts DC, 100 kAIC at 240 Volts AC at 50 to 60 Hertz, and a standard pressure load terminal. The Cutler-Hammer EDH2175 circuit breaker is contained in a Frame F Enclosure. The Cutler-Hammer EDH2175 circuit breaker can be housed in a weatherproof sheet steel enclosure by using a 3R rainproof surface mounting for the circuit breaker to act as a main protective and disconnecting component for the feeder circuit. The Cutler-Hammer EDH2175 circuit breaker is equipped with a PM3 device which is versatile for secure communication to a local network or the internet via the Power Xpert® Gateways. The Cutler-Hammer EDH2175 circuit breaker can be configured with a wire seal used to protect the circuit breaker cover on the trip unit to avoid adjustments after the settings are accomplished.
End cap accessory kits can be provided with the Cutler-Hammer EDH2175 circuit breaker for load and line conductor terminations. The end cap protects the conductor by using a ring-type connector. The Cutler-Hammer EDH2175 circuit breaker provides reliable, high quality, unique performance, and sustainable value. An auxiliary switch is optional for use with the Cutler-Hammer EDH2175 circuit breaker to enable the monitoring panel to indicate the status of the circuit breaker electrically. The Cutler-Hammer EDH2175 circuit breaker features a cause-of-trip LED module which provides a cause-of-trip indication through LEDs. The module connects directly onto the Cutler-Hammer EDH2175 circuit breaker trip unit. When the Cutler-Hammer EDH2175 circuit breaker trips, the cause-of-trip LED module will indicate the cause of a trip through the LED indication. The cause-of-trip LED module is reset after the resetting of the Cutler-Hammer EDH2175 circuit breaker.
| Part Number/Catalog No. | EDH2175 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 2 |
| Interrupting Capacity | 100 kAIC at 240 Volts AC |
| Weight | 3 pounds |
| Trip Unit | Thermal-Magnetic |
| Dimensions | 4.13 x 6 x 3.38 inches |
| Part Number/Catalog No. | EDH2175 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 2 |
| Interrupting Capacity | 100 kAIC at 240 Volts AC |
| Weight | 3 pounds |
| Trip Unit | Thermal-Magnetic |
| Dimensions | 4.13 x 6 x 3.38 inches |