UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More
Some of the products sold by UrgentAutomation may come with firmware installed on them. UrgentAutomation makes no representation as to your ability or right to download, obtain, or use any firmware provided by the product's manufacturer. To the extent you wish to use such firmware, it is your responsibility to comply with the terms of any applicable license or other such agreement related to the download, installation, or use of the firmware. UrgentAutomation makes no representation that the version of the firmware that is installed on any product it sells is appropriate for your needs or use. Further, UrgentAutomation does not sell, re-sell, or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. To the extent any of the products sold by UrgentAutomation requires software for operation, you acknowledge that UrgentAutomation does not sell or license such software and that it is solely your responsibility to obtain the software or a proper license to use it from authorized sources. Read less
The Eaton EDS2110 is a Series C molded case circuit breaker. It is a complete breaker with a built-in magnetic–thermal trip module which is non-interchangeable. The 2-pole EDS2110’s specifications are 240 Volts AC and 125 Volts DC power, 110 Amps of current, and 42 kAIC at 240 Volts AC. Its frequency specifications are 50 to 60 Hertz. To avoid potential equipment damage and injury for installers, the manufacturer’s recommendation is to carry out the installation with the circuit breaker in the off position. It is also recommended to ensure that the working area is clear of high voltages. Other electrical equipment nearby should also be powered off. The F-frame EDS2110 is HACR rated. It is also well-suited for reverse feed operation. The weight of the EDS2110 is approximately 3 pounds. The dimensions of the EDS2110 are 152 millimeters in height, 69.9 millimeters in width, and 85.7 millimeters in depth.
The manual operation of the EDS2110 is controlled by the circuit breaker handle and the push-to-trip button. After tripping occurs, the breaker is reset by moving the breaker handle to extreme off position. However, when a thermal trip occurs, the breaker cannot be reset until the thermal element has cooled sufficiently. The tripping function can be checked by the use of the push-to-trip button which is used to periodically operate the tripping mechanism. Series C breakers such as the EDS2110 are designed for years of trouble-free operation. However, inspection and maintenance as per a periodic schedule are recommended to check for indications of breaker damage and deterioration which could prevent the breaker from operating according to its specifications.