UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More
Some of the products sold by UrgentAutomation may come with firmware installed on them. UrgentAutomation makes no representation as to your ability or right to download, obtain, or use any firmware provided by the product's manufacturer. To the extent you wish to use such firmware, it is your responsibility to comply with the terms of any applicable license or other such agreement related to the download, installation, or use of the firmware. UrgentAutomation makes no representation that the version of the firmware that is installed on any product it sells is appropriate for your needs or use. Further, UrgentAutomation does not sell, re-sell, or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. To the extent any of the products sold by UrgentAutomation requires software for operation, you acknowledge that UrgentAutomation does not sell or license such software and that it is solely your responsibility to obtain the software or a proper license to use it from authorized sources. Read less
The Cutler-Hammer EDS3200 is a three-pole complete molded case circuit breaker. The device is equipped with a thermal magnetic release as a protective mechanism for applications. It is suitable to be used in applications that have around 20% less current consumption than this device can deliver (200 Amps). The interrupting capacity (kA symmetrical amperes) of the EDS3200 is 42 kAIC at 240 Volts AC (50 to 60 Hertz) or 10 kAIC at 125 Volts DC. Note that operating characteristics of the MCCB can vary depending on the ambient temperature. The device has been tested for a maximum temperature of 40 degrees Celsius (104 degrees Fahrenheit).
The EDS3200 MCCB, like all of Eaton’s Cutler-Hammer F-Frame Circuit Breakers, is HACR rated. The device is usable for HID (High-Intensity Discharge) and for reverse feed. The circuit breaker is factory-sealed. It is UL489 certified. Generally, any MCCB must be assembled before installation in a system and before being put to use. Always check the condition of the device for damage before mounting it into the system. The Eaton EDS3200 is packed in highly-isolated housing with dimensions of 3.38 inches x 6.00 inches x 2.75 inches (86 millimeters x 152 millimeters x 70 millimeters). The device should be installed to mounting panels over predrilled holes (read the bolt drilling plan from the instruction manual). Fix the device with mounting screws, washers, and nuts. Do not exceed 28 pounds per inch of torque when tightening the screws.