Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The EHD1100 is a Single-Pole Molded Case Circuit Breaker with a non-interchangeable trip unit manufactured by Cutler-Hammer (Eaton). It belongs to C-series of Eaton’s MCCBs that are well-known for compact housing design, high breaking capacity, and short flashover distance. This is a thermal-magnetic type of circuit breaker that uses bimetal for overcurrent protection and electromagnetic assembly to provide short-circuit safety to the users of electrical installations. It can be applied to installations with 277 Volts AC maximum voltage or with 125 Volts DC maximum voltage. Its DC ratings are valid only for the non-inductive electrical circuits. The EHD1100 brings the necessary protection to your electrical circuits and provides a safe working environment to your equipment. After implementing this protective device in your industrial automation system, you will significantly reduce maintenance costs and downtimes of your system.
The Cutler-Hammer EHD1100 has the current capacity of 100 Amps. The module is delivered in a standard molded case and is attached to the panelboard over a bolt-on connection. The device is quickly installed, but you should take some time and read the instructions carefully before starting the installation process to avoid any possible hazards. You are free to install this MCCB horizontally or vertically in the electrical cabinet. The temperature inside of the cabinet must be maintained between -20 and 70 degrees Celsius (-4 and 158 degrees Fahrenheit). The EHD1100 weighs approximately 0.9 kilograms (2 pounds), with total dimensions of 86 x 162 x 35 millimeters (3.38 x 6.00 x 1.38 inches). It is also CSA, EIC and UL certified.
| Part Number/Catalog No. | EHD1100 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 1 |
| Trip Amps | 4 kA @ 277V |
| Interrupting Capacity | 2 lb |
| Weight | Thermal-Magnetic |
| Trip Unit | 1.38 x 6 x 3.38 in. |
| Part Number/Catalog No. | EHD1100 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 1 |
| Trip Amps | 4 kA @ 277V |
| Interrupting Capacity | 2 lb |
| Weight | Thermal-Magnetic |
| Trip Unit | 1.38 x 6 x 3.38 in. |