EHD2010

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.

Rated 4.5 with 19 reviews

UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More


EHD2010

Description: The Eaton EHD2010 Molded Case Circuit Breaker is in the C Series and has 2 Pole(s). The module has 10 Trip Amps and a Thermal-Magnetic Trip Unit.

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.


Description: The Eaton EHD2010 Molded Case Circuit Breaker is in the C Series and has 2 Pole(s). The module has 10 Trip Amps and a Thermal-Magnetic Trip Unit.


Rated 4.5 with 19 reviews







About EHD2010

The EHD2010 is a Circuit Breaker from Series C manufactured by Eaton (formerly Cutler-Hammer). The device has a Type F frame and a molded case. The EHD2010 has 2 poles and a 10 Amp maximum continuous current rating at 40 degrees Celsius. It features an arc extinguisher technology that makes it usable for applications with 14 kAIC interruption rating at 480 Volts AC input voltage. This is also the maximum voltage that can be applied to this molded case circuit breaker without damaging the device. The EHD2010 has a thermal-magnetic trip mechanism that is not interchangeable. The Eaton Cutler-Hammer EHD2010 supports numerous accessories that can further extend its capabilities. The most usual ones are auxiliary switches and connectors for multiple wires. For the purpose of device control protection, you can upgrade the EHD2010 with the lockable handle blocker external accessory or with the cylinder lock. This MCCB should be occasionally inspected to ensure that the tripping mechanism is performing as required. You can use the red PUSH-TO-TRIP button for this purpose.

When installing or removing the EHD2010, always deactivate the power source that is supplying the input side of the device; this is to avoid dangerous effects on the breaker and to keep the personnel performing the installation safe. You will need 2.75 x 6.00 x 3.38 inches (70 x 86 x 35 millimeters) of space available to install the EHD2010. Its shipping weight is approximated at 1.36 kilograms (3.0 pounds). This molded case circuit breaker is applied only to distribution systems with 50 to 60 Hertz rating.


Technical specifications:


Part Number/Catalog No.EHD2010
Product TypeMolded Case Circuit Breaker
SeriesC
FrameF
Pole(s)2
Trip Amps18 kA @ 240V
Interrupting Capacity3 lb
WeightThermal-Magnetic
Trip Unit2.75 x 6 x 3.38 in.
Part Number/Catalog No.EHD2010
Product TypeMolded Case Circuit Breaker
SeriesC
FrameF
Pole(s)2
Trip Amps18 kA @ 240V
Interrupting Capacity3 lb
WeightThermal-Magnetic
Trip Unit2.75 x 6 x 3.38 in.
Common misspellings:
  • EHD2o10
  • EHD20l0
  • EHD201o