UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More
Some of the products sold by UrgentAutomation may come with firmware installed on them. UrgentAutomation makes no representation as to your ability or right to download, obtain, or use any firmware provided by the product's manufacturer. To the extent you wish to use such firmware, it is your responsibility to comply with the terms of any applicable license or other such agreement related to the download, installation, or use of the firmware. UrgentAutomation makes no representation that the version of the firmware that is installed on any product it sells is appropriate for your needs or use. Further, UrgentAutomation does not sell, re-sell, or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. To the extent any of the products sold by UrgentAutomation requires software for operation, you acknowledge that UrgentAutomation does not sell or license such software and that it is solely your responsibility to obtain the software or a proper license to use it from authorized sources. Read less
The Eaton Cutler-Hammer EHD3010 Molded Case Circuit Breaker is a thermal-magnetic circuit in the Series C Frame F family of multi-purpose circuit breakers with a non-interchangeable trip unit that is used for main or branch circuit protection in a wide range of low-voltage distribution systems. This breaker, like all breakers within this current rating range (10 to 30 Amps), are specifically designed for High-Intensity Discharge (HID) use, and they are also rated for HACR (Heating, Air-conditioning, and Refrigerating) and for reverse feed use. The EHD3010 has a nominal current rating of 10 Amps, with an interrupt rating of 65 Kilo-Amps Interrupting Capacity (KAIC), and it is suitable for applications with a line operating voltage of 600 Volts AC. It has a 3-pole wiring system, with a standard copper/aluminum steel pressure terminal attached to each pole, and it can be wired for both single and 3-phase use.
The EHD3010 has a sealed, insulated enclosure which protects against tampering with integral internal components, and which protects field personnel from hazardous shocks. It has a non-interchangeable trip unit made of fixed thermal and fixed magnetic trip elements, which provides fast-acting and instantaneous trip actions by using electromagnets connected in series with a line load and a bimetal strip which deflects upon being heated by prolonged current overload. The EHD3010 also has a trip-free operating mechanism of the quick make/break type, which prevents the breaker’s contact from closing in the event of circuit overloads, and which also indicates whether the breaker is tripped, on, or off. It has a rated operating temperature limit of 40 degrees Celsius, and it works well within a 0 to 95% non-condensing relative humidity range. The EHD3010 has an average weight of 2.0 kilograms (4.5 pounds), and it has total shipping dimensions of 105.0 x 152.4 x 86.0 millimeters (4.13 x 6.0 x 3.38 inches).