Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The Eaton EHD3025 is a thermal-magnetic circuit breaker with non-interchangeable trip units. This device can work with voltages of 480 Volts AC and 250 Volts DC. It is used to protect electrical circuits from excessive currents, circuit overloading, and short-circuits. The Eaton Cutler-Hammer EHD3025 is a molded case circuit breaker that has 3 poles. Its current rating is calibrated at 40 degrees Celsius and it is 25 Amps. This is an F-frame module with a non-interchangeable trip assembly. That means that users cannot adjust the performance of the device, but this ensures that there will be no human error in setting the device.
The Eaton Cutler-Hammer EHD3025 circuit breaker is appropriate for applications that require high current switching capabilities. It can be used for overcurrent protection at the supply point and where wire sizes are reduced in the electrical circuit. Furthermore, users can install the module to protect conductors, motor control apparatus, and motors against ground fault conditions and short-circuits. The Eaton EHD3025 has an F-frame enclosure with dimensions of 152 millimeters x 105 millimeters x 86 millimeters (6.0 inches x 4.1 inches x 3.4 inches). The device can be operated at temperatures of up to 70 degrees Celsius (168 degrees Fahrenheit) but its normal operating temperature should not be greater than 40 degrees Celsius (104 degrees Fahrenheit). On the front side, users will find a handle to put this device into an operating state. This handle goes to a trip position automatically when the device detects an error condition in the electrical circuit.
| Part Number/Catalog No. | EHD3025 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 3 |
| Trip Amps | 18 kA at 240 Volts AC |
| Interrupting Capacity | 4.5 pounds |
| Weight | Thermal-Magnetic |
| Trip Unit | 4.13 x 6 x 3.38 inches |
| Part Number/Catalog No. | EHD3025 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 3 |
| Trip Amps | 18 kA at 240 Volts AC |
| Interrupting Capacity | 4.5 pounds |
| Weight | Thermal-Magnetic |
| Trip Unit | 4.13 x 6 x 3.38 inches |