UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More
Some of the products sold by UrgentAutomation may come with firmware installed on them. UrgentAutomation makes no representation as to your ability or right to download, obtain, or use any firmware provided by the product's manufacturer. To the extent you wish to use such firmware, it is your responsibility to comply with the terms of any applicable license or other such agreement related to the download, installation, or use of the firmware. UrgentAutomation makes no representation that the version of the firmware that is installed on any product it sells is appropriate for your needs or use. Further, UrgentAutomation does not sell, re-sell, or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. To the extent any of the products sold by UrgentAutomation requires software for operation, you acknowledge that UrgentAutomation does not sell or license such software and that it is solely your responsibility to obtain the software or a proper license to use it from authorized sources. Read less
The Eaton Cutler-Hammer EHD3045 Molded Case Circuit Breaker is a complete breaker unit in the Frame F Series C family of completely assembled breakers with non-interchangeable thermal-magnetic trip units and it is used for main or branch circuit protection in a variety of low-voltage distribution systems. This circuit breaker comes with a 3-pole wiring design that is suitable for 3-phase applications, and it comes with 3 line and load end terminals that are supplied as standard features. The EHD3045 is built for 600 Volts AC/250 Volts DC circuits, and it has a nominal current rating of 45 Amps with a maximum interrupting rating of 65 kAIC. Like all factory-assembled units, the EHD3045 comes with 3 standard line and load side copper/aluminum steel pressure terminals, a fixed thermal-magnetic trip unit, an operating mechanism, and a sealed enclosure made of insulation material.
Its terminal has a 14 by 10 AWG wire range with protective terminal covers, and each pole must be connected to a terminal. Its trip unit is of the thermal and magnetic type which provides fast-acting thermal trip action through load-heated bimetal strips that will deflect upon a prolonged overload. There is also an instantaneous magnetic trip action that is provided by using electromagnets in series with a line current which provides instantaneous trip action when the line current exceeds the designated value. The EHD3045 has an operating mechanism, which not only prevents the breaker contacts from being held closed in abnormal circuit conditions, but also indicates whether the breaker is on, off, or tripped. The EHD3045 is UL, CSA, and CE-certified, and it weighs approximately 2.0 kilograms.