FD4025

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.

Rated 5 with 5 reviews

UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More


FD4025

Description: The Eaton FD4025 Molded Case Circuit Breaker is in the C Series and has 4 Pole(s). The module has 25 Trip Amps and a Thermal-Magnetic Trip Unit.

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.


Description: The Eaton FD4025 Molded Case Circuit Breaker is in the C Series and has 4 Pole(s). The module has 25 Trip Amps and a Thermal-Magnetic Trip Unit.


Rated 5 with 5 reviews







About FD4025

The Eaton FD4025 is a molded case FD-type circuit breaker. Applications requiring 10 to 225 Amps can be satisfied by F-Frame type circuit breakers. The FD4025 carries the HACR rating and is appropriate for reverse feed use. The FD4025 is also appropriate for high-intensity discharge use. The FD4025 has a current rating of 25 Amps. Its DC voltage rating is around 250 Volts DC with associated 10 kiloamps interrupt capacity.  For AC voltages, the FD4025 is rated at 65, 35, and 18 kiloamps interrupt capacity at 240, 480, and 600 Volts AC respectively. The FD4025 is a four pole molded case circuit breaker and utilizes a non-interchangeable fixed magnetic/thermal tripping module. Steel line and load terminals are included with the circuit breaker. Aluminum or copper wire of 2.5 to 50 millimeters squared is recommended for use with the circuit breaker terminals. To comply with UL 489 codes, the FD4025 is sealed at the factory after installation of all accessories.

Severe injury or serious property damage can occur during installation and maintenance of high voltage devices if mistakes are made. Therefore following precautions should be following during installation or maintenance: the FD4025 circuit breaker should be in an off state, as should all other electrical equipment. The work area should be clear of all voltages and maintenance or installation activities should be carried out by trained and experienced technicians. The FD4025 is available in an F-frame. It weighs 2.7 kilograms and its dimensions are 152.4 x 139.7 x 86 millimeters.


Technical specifications:


Part Number/Catalog No.FD4025
Product TypeMolded Case Circuit Breaker
SeriesC
FrameF
Pole(s)4
Trip Amps35 kA @ 277V
Interrupting Capacity6 lb
WeightThermal-Magnetic
Trip Unit5.5 x 6 x 3.38 in.
Part Number/Catalog No.FD4025
Product TypeMolded Case Circuit Breaker
SeriesC
FrameF
Pole(s)4
Trip Amps35 kA @ 277V
Interrupting Capacity6 lb
WeightThermal-Magnetic
Trip Unit5.5 x 6 x 3.38 in.
Common misspellings:
  • FDA025
  • FD4o25