UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More
Some of the products sold by UrgentAutomation may come with firmware installed on them. UrgentAutomation makes no representation as to your ability or right to download, obtain, or use any firmware provided by the product's manufacturer. To the extent you wish to use such firmware, it is your responsibility to comply with the terms of any applicable license or other such agreement related to the download, installation, or use of the firmware. UrgentAutomation makes no representation that the version of the firmware that is installed on any product it sells is appropriate for your needs or use. Further, UrgentAutomation does not sell, re-sell, or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. To the extent any of the products sold by UrgentAutomation requires software for operation, you acknowledge that UrgentAutomation does not sell or license such software and that it is solely your responsibility to obtain the software or a proper license to use it from authorized sources. Read less
The Eaton FD4080 is an 80 Amp rated, F-Frame, complete FD-type circuit breaker. The FD4080 has four poles. It includes both line and load side terminals which are made from steel. Either copper or aluminum wire should be used for termination on the breaker terminals. The recommended cable size range is between #4 to #1/0 AWG. Use of an appropriate joint compound is recommended with aluminum conductors to prevent terminal overheating which can lead to breaker damage and spurious tripping. The FD4080 uses a non-interchangeable magnetic/thermal trip management module. The FD4080 can be used for reverse feed applications and is also HACR rated. The current rating for the FD4080 is 80 Amps. The voltage rating for the FD4080 is around 600 Volts AC or 250 Volts DC. At 250 Volts DC, the FD4080 is rated at 10 kiloamps interrupt capacity. At 480 Volts DC the FD4080 is rated at 35 kiloamps interrupt capacity and at 600 Volts AC it is rated at 18 kiloamps interrupt capacity.
During maintenance and installation, the FD4080 must be in off state to avoid the possibility of injury or death. Installation of any accessories should be done before circuit breaker installation and mounting. Depending on requirements, the FD4080 can be mounted differently. Termination on the breaker can be done once the breaker has been properly mounted. The FD4080 has dimensions of 152.4 by 139.7 by 86.0 millimeters. It has an approximate weight of 2.7 kilograms.