FD4225

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.

Rated 4.7 with 12 reviews

UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More


FD4225

Description: The Eaton FD4225 Molded Case Circuit Breaker is in the C Series and has 4 Pole(s). The module has 225 Trip Amps and a Thermal-Magnetic Trip Unit.

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.


Description: The Eaton FD4225 Molded Case Circuit Breaker is in the C Series and has 4 Pole(s). The module has 225 Trip Amps and a Thermal-Magnetic Trip Unit.


Rated 4.7 with 12 reviews







About FD4225

The FD4225 is a thermal magnetic circuit breaker manufactured by Eaton Cutler-Hammer. The Cutler-Hammer FD4225 circuit breaker belongs to Series C of the Eaton FD Type Molded Case Circuit Breakers. The Cutler-Hammer FD4225 circuit breaker features 4 poles, 3 phases of power, 225 Amps of current, 600 Volts AC voltage at 50 to 60 Hertz, an interrupting rating of 18 kAIC at 600 Volts AC and lug terminals for side loads. The Cutler-Hammer FD4225 circuit breaker is operated via a toggle-design mechanism which is mechanically independent of the handle in such a way that the contacts cannot be held closed against the short circuit currents.

Tripping resulting from overloading or short circuits on the Cutler-Hammer FD4225 circuit breaker is clearly shown by the position on the handle. This dependable and fast contact characteristic of the Cutler-Hammer FD4225 circuit breaker is designed to enhance safety. The toggle handles integrate into the tripped location when the Cutler-Hammer FD4225 circuit breaker is tripped by one of the overcurrent presents on the Cutler-Hammer FD4225 circuit breaker or undervoltage induced. The Cutler-Hammer FD4225 circuit breaker can be switched off due to a trip-out action by bringing the toggle handle beyond the off position. The Cutler-Hammer FD4225 circuit breaker is equipped with field-installed multi-wire connectors used to distribute loads from the Cutler-Hammer FD4225 circuit breaker to other devices when there is only one terminal block for distribution.


Technical specifications:


Part Number/Catalog No.FD4225
Product TypeMolded Case Circuit Breaker
SeriesC
FrameF
Pole(s)4
Trip Amps35 kA at 277 Volts
Interrupting Capacity6 pounds
WeightThermal-Magnetic
Trip Unit5.5 x 6 x 3.38 inches
Part Number/Catalog No.FD4225
Product TypeMolded Case Circuit Breaker
SeriesC
FrameF
Pole(s)4
Trip Amps35 kA at 277 Volts
Interrupting Capacity6 pounds
WeightThermal-Magnetic
Trip Unit5.5 x 6 x 3.38 inches
Common misspellings:
  • FDA225