UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More
Some of the products sold by UrgentAutomation may come with firmware installed on them. UrgentAutomation makes no representation as to your ability or right to download, obtain, or use any firmware provided by the product's manufacturer. To the extent you wish to use such firmware, it is your responsibility to comply with the terms of any applicable license or other such agreement related to the download, installation, or use of the firmware. UrgentAutomation makes no representation that the version of the firmware that is installed on any product it sells is appropriate for your needs or use. Further, UrgentAutomation does not sell, re-sell, or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. To the extent any of the products sold by UrgentAutomation requires software for operation, you acknowledge that UrgentAutomation does not sell or license such software and that it is solely your responsibility to obtain the software or a proper license to use it from authorized sources. Read less
The FDB2080 is a circuit breaker that has been designed and manufactured by Cutler-Hammer (Eaton Corporation). This breaker has been created according to the specifications of Frame F from Series C. The Cutler-Hammer (Eaton Corporation) FDB2080 circuit breaker operates within a voltage range of 600 Volts AC and a frequency of 50 to 60 Hertz. It can also operate with a DC voltage of 250 Volts DC. The Cutler-Hammer (Eaton Corporation) FDB2080 circuit breaker features 2 poles and these poles are in charge of detecting and performing a tripping action. Regardless of which pole detected the fault first, both of them are going to act at the same time since these are connected through a common bar.
The Cutler-Hammer (Eaton Corporation) FDB2080 circuit breaker is sensitive to warm temperatures. When calibrated, a temperature of 40 degrees Celsius was used, meaning that if the breaker is intended to operate at higher temperatures, its performance could vary. The Cutler-Hammer (Eaton Corporation) FDB2080 circuit breaker can be put back into operations once a fault has been detected, corrected, and cleared. This makes the breaker a multiple time device, meaning that it can function for a long time, regardless of the number of faults that have been previously detected. It is recommended to clear the fault as soon as possible in order to save process time. The Cutler-Hammer (Eaton Corporation) FDB2080 circuit breaker is one of the most commonly used circuit breakers. It has the ability to detect and stop abnormal line currents such as load currents and short-circuit currents through a tripping mechanism before it can cause further damage to the system and equipment.