Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The FDB3030 is a Series C molded case circuit breaker that is manufactured by Eaton Cutler-Hammer. The circuit breaker has 3 poles and 30 Amps of trip current. The F frame molded case circuit breaker has the following physical dimensions: 4.125 inches width, 6 inches height, and 3.375 inches depth. The shipping weight of the FDB3030 circuit breaker is about 4.5 pounds. The molded case circuit breakers are engineered with the highest quality material to control excessive current flow or short circuits in industrial setups or houses in order to prevent damage to the electrical equipment.
In order to provide the highest quality performance, the FDB3030 conforms to numerous international standards such as the British Standard institution BS 4752, the International Electrotechnical commission recommendations IEC 157-1, the South African Bureau of standards, the SABS 156, and the UL 489 (for molded case circuit breakers and circuit breakers enclosures, including marine circuit breakers under File E7819). According to the UL 489 international organization standards, the FDB3030 has a capacity for an interrupting capacity of 18,000 kAIC for 240 Volts AC at 50/60 Hertz frequency, 14,000 kAIC interrupting at 480 Volts AC (50/60 Hertz frequency), and 14,000 kAIC at 600 Volts AC (at 50/60 Hertz frequency). The DC interrupting capacity of the FDB3030 is 10,000 kAIC at 250 Volts DC. The constant time measured for these capacities is 3 milliseconds minimum at 10 kA and 8 milliseconds minimum at 2 kA.
| Part Number/Catalog No. | FDB3030 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 3 |
| Trip Amps | 14 kA @ 480V |
| Interrupting Capacity | 4.5 lb |
| Weight | Thermal-Magnetic |
| Trip Unit | 4.13 x 6 x 3.38 in. |
| Part Number/Catalog No. | FDB3030 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 3 |
| Trip Amps | 14 kA @ 480V |
| Interrupting Capacity | 4.5 lb |
| Weight | Thermal-Magnetic |
| Trip Unit | 4.13 x 6 x 3.38 in. |