UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More
Some of the products sold by UrgentAutomation may come with firmware installed on them. UrgentAutomation makes no representation as to your ability or right to download, obtain, or use any firmware provided by the product's manufacturer. To the extent you wish to use such firmware, it is your responsibility to comply with the terms of any applicable license or other such agreement related to the download, installation, or use of the firmware. UrgentAutomation makes no representation that the version of the firmware that is installed on any product it sells is appropriate for your needs or use. Further, UrgentAutomation does not sell, re-sell, or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. To the extent any of the products sold by UrgentAutomation requires software for operation, you acknowledge that UrgentAutomation does not sell or license such software and that it is solely your responsibility to obtain the software or a proper license to use it from authorized sources. Read less
The Eaton FDB4110 is a thermal magnetic circuit breaker. The breaker has a non-replaceable trip unit and it has 4 poles. The FDB4110 belongs to the Series C group of circuit breakers with an F frame size and a molded case. The breaker’s terminals are only present on the load side. For the capacity, the FDB4110 has an interrupting capacity of 18 kAIC at a voltage of 240 Volts AC under the Underwriters Laboratory (UL) 489 standards. Additionally, under these standards, the FDB4110 has 10 kAIC at 250 Volts DC, but no interrupting capacity rating at 125 Volts DC.
Also, under the IEC 157-1 interrupting capacity ratings, the FDB4110 has 10 kAIC at 250 Volts DC but no capacity ratings at 125 Volts DC. The Eaton FDB4110 has a maximum continuous current rating of 110 Amps tested at a maximum temperature of 40 degrees Celsius. In standard applications, the circuit breaker is designed to accommodate an operating frequency (with an alternating current) of between 50 and 60 Hertz. The FDB4110, as with other circuit breakers with an F frame, can be used in reverse feed applications. The circuit breaker is factory-assembled with the intention of providing years of circuit protection with minimal maintenance. However, when carrying out the few necessary maintenance procedures, e.g. cleaning the terminal and the casing, also check the device for things like extreme discoloration of the molded case or the signs of melting on the terminals. Melting indicates overheating and it can be caused by loose terminals or excessive ambient temperature.