FDC2030

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.

Rated 4.5 with 5 reviews

UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More


FDC2030

Description: The Eaton FDC2030 Molded Case Circuit Breaker is in the C Series and has 2 Pole(s). The module has 30 Trip Amps and a Thermal-Magnetic Trip Unit.

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.


Description: The Eaton FDC2030 Molded Case Circuit Breaker is in the C Series and has 2 Pole(s). The module has 30 Trip Amps and a Thermal-Magnetic Trip Unit.


Rated 4.5 with 5 reviews







About FDC2030

The FDC2030 is a current limiting circuit breaker from Westinghouse/Eaton. The breaker has 2 poles and its trip unit trips when the current exceeds 30 Amps. The FDC2030 has an F frame type and it accommodates terminals on the load side only. The FDC2030, as with all other Eaton circuit breakers with an F frame type, is HACR rated. Being a 2-pole circuit breaker, the FDC2030 has a width of 2.75 inches a height of 6.0 inches and a depth of 3.38 inches. The Cutler-Hammer FDC2030 molded case circuit breaker is purposely designed and manufactured to offer protection to industrial systems that use low voltage. To protect the circuit breaker against fungus, the case is molded from a mix of glass and polyester which also keeps moisture away.

For parts in the FDC2030 that are not factory-protected against moisture, special treatment must be provided if the circuit breaker is to be used in environments that are susceptible to the build-up of moisture and fungus. The FDC2030 employs the use of a thermal magnetic mechanism in its trip unit. The interrupting capacity for the FDC2030 stands at 200,000 Amps at a voltage range of between 220 and 240 Volts AC and 22,000 Amps at 250 Volts DC while at 480 Volts AC, the FDC2030 has an interrupt capacity of 100,000 Amps. Note that these interrupt ratings apply both for the UL 489 and the IEC 157-1 standards. For the FDC2030 to operate as required, like with other circuit breakers from Eaton, a temperature at or below 40 degrees Celsius must be maintained around its operating environment.


Technical specifications:


Part Number/Catalog No.FDC2030
Product TypeMolded Case Circuit Breaker
SeriesC
FrameF
Pole(s)2
Trip Amps200 kA at 240 Volts
Interrupting Capacity3 pounds
WeightThermal-Magnetic
Trip Unit2.75 x 6 x 3.38 inches
Part Number/Catalog No.FDC2030
Product TypeMolded Case Circuit Breaker
SeriesC
FrameF
Pole(s)2
Trip Amps200 kA at 240 Volts
Interrupting Capacity3 pounds
WeightThermal-Magnetic
Trip Unit2.75 x 6 x 3.38 inches
Common misspellings:
  • FDC2o30
  • FDC203o