FDC2050

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.

Rated 4.9 with 17 reviews

UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More


FDC2050

Description: The Eaton FDC2050 Molded Case Circuit Breaker is in the C Series and has 2 Pole(s). The module has 50 Trip Amps and a Thermal-Magnetic Trip Unit.

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.


Description: The Eaton FDC2050 Molded Case Circuit Breaker is in the C Series and has 2 Pole(s). The module has 50 Trip Amps and a Thermal-Magnetic Trip Unit.


Rated 4.9 with 17 reviews







About FDC2050

The FDC2050 is a thermal magnetic circuit breaker, it has non-interchangeable trips, and it belongs to Series C of the molded case circuit breakers manufactured by Cutler-Hammer. The Cutler-Hammer FDC2050 thermal magnetic circuit breaker with non-interchangeable trips operates at a maximum voltage of 600 Volts AC or 250 Volts DC. It has 2 poles and it has a maximum continuous ampere rating of 50 Amps at a specific temperature of 40 degrees Celsius. This temperature has been established at the moment of calibration. If a different temperature is required, the breaker should be derated or a new calibration process must be performed. This circuit breaker is HACR rated and it meets the requirements of the Federal Specifications.

The main function of the Cutler-Hammer FDC2050 thermal magnetic circuit breaker with non-interchangeable trips is to protect systems against abnormal circuit lines, closing separable contacts, and impeding further damage to the whole system or equipment. Thermal magnetic breakers like the Cutler-Hammer FDC2050 thermal magnetic circuit breaker are considered an industry standard since it is a general purpose device that is suitable for most applications that require its features. Once a circuit breaker has tripped, it is important to determine the cause of the trip and then put the breaker back into service. Trip causes can be either a long delay, a short delay, or an instantaneous or ground fault. The internal parts of the Cutler-Hammer FDC2050 thermal magnetic circuit breaker and non-interchangeable trips are an alarm, an auxiliary switch, an under-voltage release mechanism, and a low-energy shunt trip.


Technical specifications:


Part Number/Catalog No.FDC2050
Product TypeMolded Case Circuit Breaker
SeriesC
FrameF
Pole(s)2
Trip Amps200 kA at 240 Volts AC
Interrupting Capacity3 pounds
WeightThermal-Magnetic
Trip Unit2.75 x 6 x 3.38 inches
Part Number/Catalog No.FDC2050
Product TypeMolded Case Circuit Breaker
SeriesC
FrameF
Pole(s)2
Trip Amps200 kA at 240 Volts AC
Interrupting Capacity3 pounds
WeightThermal-Magnetic
Trip Unit2.75 x 6 x 3.38 inches
Common misspellings:
  • FDC2o50
  • FDC205o