Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The Eaton Cutler-Hammer FDC3110 is an industrial circuit breaker with a molded case that falls into the category of 10 to 225 Amps rated devices. This type of FDC circuit breaker comes with non-interchangeable trip units and it includes terminals on the load end only. The FDC3110 is manufactured as an Eaton Series C protective device and this series is used in combination with various components such as switchboards, panelboards, motor control centers, and other applications that are common in this kind of environment. These circuit breakers are designed for different applications, so they are made in 8 different frames and with different operating voltage and ampere ratings. The FDC3110 is a complete breaker with fixed thermal and fixed magnetic trip units and load side terminals. In the Eaton Cutler-Hammer specifications, the interrupting rating of this circuit breaker is 200 kAIC at 240 Volts AC or 100 kAIC at 480 Volts AC. Its frequency rating is within a standard 50 to 60 Hertz range. The voltage rating of the FDC3110 is 600 Volts AC or 250 Volts DC while its amperage rating is at 110 Amps. In addition to that, the FDC3110 model is categorized as a 3-pole circuit breaker.
The general specifications of this circuit breaker also include a length of 8.5 centimeters (3.38 inches), a height of 10.49 centimeters (4.13 inches), and a width of 10.49 centimeters (4.13 inches). The weight of the product is around 2 kilograms or 4.5 pounds. The Series C molded case circuit breakers that exceed that standards set in North America have been used for more than 20 years and they are a very reliable solution to resolving the issues caused by current overloads and short circuits that could lead to equipment damage and also present a risk for those who operate the system. Also, it should be noted that all of the circuit breakers with this kind of frame are suitable for reverse feed use and they are HACR rated and UL listed.
| Part Number/Catalog No. | FDC3110 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 3 |
| Trip Amps | 10 to 225 Amps |
| Interrupting Capacity | 200 kAIC at 240 Volts AC and 100 kAIC at 480 Volts AC |
| Weight | 4.5 pounds |
| Dimensions | 4.13 x 6 x 3.38 inches |
| Part Number/Catalog No. | FDC3110 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 3 |
| Trip Amps | 10 to 225 Amps |
| Interrupting Capacity | 200 kAIC at 240 Volts AC and 100 kAIC at 480 Volts AC |
| Weight | 4.5 pounds |
| Dimensions | 4.13 x 6 x 3.38 inches |