HFD1015

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.

Rated 4.8 with 20 reviews

UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More


HFD1015

Description: The Eaton HFD1015 Molded Case Circuit Breaker is in the C Series and has 1 Pole(s). The module has 15 Trip Amps and a Thermal-Magnetic Trip Unit.

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.


Description: The Eaton HFD1015 Molded Case Circuit Breaker is in the C Series and has 1 Pole(s). The module has 15 Trip Amps and a Thermal-Magnetic Trip Unit.


Rated 4.8 with 20 reviews







About HFD1015

The HFD1015 is a single-pole Type HFD Cutler-Hammer thermal-magnetic circuit breaker manufactured by the Eaton Corporation. It belongs to the Series C, F-Frame family of Eaton Cutler-Hammer circuit breakers and it is rated at 227 Volts AC or 125 Volts DC maximum voltage, 15 Amps of current, 50 to 60 Hertz frequency, and 65 kiloamperes interrupting capacity. Its dimensions are 2.1 x 4.5 x 6.6 inches and it provides safe operation and protection for electrical equipment and circuits against overloading and fault currents. When applied within its rating, the HFD1015 thermal-magnetic circuit breaker is ideal for use in low voltage systems for controlling devices such as motors and other resistive loads. It features a fixed magnetic trip and fixed thermal trip units and its compact and lightweight design minimizes the space required for mounting. The HFD1015 supports DIN rail mounting and it can also be mounted on panel boards.

The glass-polyester casing of the HFD1015 thermal magnetic circuit breaker provides insulation to ensure operator safety and protect the circuit breaker from moisture, dirt, or fungus and it has a toggle switch handle that is used for switching the circuit breaker on or off. The HFD1015 circuit breaker features screw clamp terminals on its line and load side and it is compatible with the most common circuit breaker accessories in the industry. Before resetting and closing the HFD1015 circuit breaker after it has tripped, it is essential to first detect the cause of the trip and rectify the problem because failure to do so might result in damage to the circuit breaker or the connected devices and wiring.


Technical specifications:


Part Number/Catalog No.HFD1015
Product TypeMolded Case Circuit Breaker
SeriesC
FrameF
Pole(s)1
Trip Amps65 kA @ 277V
Interrupting Capacity2 lb
WeightThermal-Magnetic
Trip Unit1.38 x 6 x 3.38 in.
Part Number/Catalog No.HFD1015
Product TypeMolded Case Circuit Breaker
SeriesC
FrameF
Pole(s)1
Trip Amps65 kA @ 277V
Interrupting Capacity2 lb
WeightThermal-Magnetic
Trip Unit1.38 x 6 x 3.38 in.
Common misspellings:
  • HFDl015
  • HFD1o15
  • HFD10l5