HFDE322536

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.

Rated 5 with 19 reviews

UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More


HFDE322536

Description: The Eaton HFDE322536 Molded Case Circuit Breaker is in the C Series and has 3 Pole(s). The module has 225 Trip Amps and a 310+ Trip Unit.

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.


Description: The Eaton HFDE322536 Molded Case Circuit Breaker is in the C Series and has 3 Pole(s). The module has 225 Trip Amps and a 310+ Trip Unit.


Rated 5 with 19 reviews







About HFDE322536

The Eaton HFDE322536 is a Series C, electronic HFDE circuit breaker. HFDE breakers support application requirements ranging from a minimum of 15 to a maximum of 225 Amps. They fulfill the IEC 157-1 requirements. The HFDE322536 is a three-pole device. It is based on an Electronic LSIG tripping unit. Following are the current, voltage, and frequency ratings: 225 Amps is the current rating, 250 Volts DC and 600 Volts AC are the voltage ratings, and 50/60 Hertz are the frequency ratings. Following are the kilo-Amps interrupting capacity ratings of the HFDE322536: 100 kAIC at 240 Volts AC and 65 kAIC at 480 Volts AC. The HFDE322536 is equipped with aluminum terminals on the load side.

The recommended wire types for the termination are copper or aluminum with 0.038 to 0.147 square inches in diameter. Overheating aluminum terminals can lead to nuisance tripping and damage to the breaker. Therefore, use of a joint compound is recommended to prevent terminal overheating. To confirm its suitability for use, the specifications of the HFDE322536 should be compared to system requirements before circuit breaker installation. The following precautions must always be followed during installation to ensure equipment and technical staff safety: the circuit breaker should be off, the voltages should be absent from the working area, and the associated electrical equipment should be de-energized. Maintenance and testing of HFDE322536 should always be carried out when it is powered off. The F-frame HFDE322536 has a weight of 4.2 pounds. Its dimensions are as follows: 6 inches in height, 4.12 inches in width, and 3.37 inches in depth.


Technical specifications:


Part Number/Catalog No.HFDE322536
Product TypeMolded Case Circuit Breaker
SeriesC
FrameF
Pole(s)3
Trip Amps100 kA at 240V
Interrupting Capacity4.5 lb
Weight310+
Trip Unit4.13 x 6 x 3.38 in.
Part Number/Catalog No.HFDE322536
Product TypeMolded Case Circuit Breaker
SeriesC
FrameF
Pole(s)3
Trip Amps100 kA at 240V
Interrupting Capacity4.5 lb
Weight310+
Trip Unit4.13 x 6 x 3.38 in.
Common misspellings: