GD3035

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.

Rated 4.5 with 7 reviews

UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More


GD3035

Description: The Eaton GD3035 Thermal-Magnetic Molded Case Circuit Breaker operates with 3 Pole(s) and 35 Trip Amps. The module has a G-Frame and 4.88 x 3 x 2.63 in. Dimensions (H x W x D).

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.


Description: The Eaton GD3035 Thermal-Magnetic Molded Case Circuit Breaker operates with 3 Pole(s) and 35 Trip Amps. The module has a G-Frame and 4.88 x 3 x 2.63 in. Dimensions (H x W x D).


Rated 4.5 with 7 reviews







About GD3035

The GD3035 from Eaton is a complete 35 Amp rated Series C circuit breaker. The AC voltage rating for the GD3035 is 480 Volts AC (at 50 to 60 Hertz) while the DC voltage rating is 125 to 250 Volts DC. The interrupt specifications for the GD3035 are 65 kAIC at 240 Volts AC, 14 kAIC at 480 Volts AC, and 10 kAIC at 250 Volts DC. The GD3035 is a 3-pole device with a non-interchangeable trip module. The trip module is of the fixed magnetic and the fixed thermal type. The GD3035 is provided by the manufacturer in a G frame. The weight of the GD3035 is 2.05 pounds. The dimensions of the GD3035 are 6.5 x 3.7 x 3.7 inches. A shunt trip, padlockable handle, and alarm switch are some of the accessories available for the GD3035. These accessories should be factory installed according to the UL standards.

Field installation of accessories can be done in areas where local codes permit the practice. The GD3035 has aluminum terminals and #10 – 1/0 AWG copper or aluminum wire is recommended for terminations. With aluminum wires, a suitable joint compound should be used to prevent terminal overheating. To minimize the possibility of injury or equipment damage, several safety precautions are recommended by the manufacturer regarding the maintenance or installation of the GD3035. In addition to general safety precautions and local regulations, the manufacturer recommends that maintenance and installation be carried out by trained personnel and that the breaker and all the connected electrical equipment should be powered off. Furthermore, care should be taken to ensure that voltages are absent from the working area.


Technical specifications:


Part Number/Catalog No.GD3035
Product TypeMolded Case Circuit Breaker
SeriesC
FrameG
Trip UnitThermal-Magnetic
Pole(s)3
Trip Amps35 Amps
Dimensions4.88 x 3 x 2.63 inches
Part Number/Catalog No.GD3035
Product TypeMolded Case Circuit Breaker
SeriesC
FrameG
Trip UnitThermal-Magnetic
Pole(s)3
Trip Amps35 Amps
Dimensions4.88 x 3 x 2.63 inches
Common misspellings:
  • GD3o35