UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More
Some of the products sold by UrgentAutomation may come with firmware installed on them. UrgentAutomation makes no representation as to your ability or right to download, obtain, or use any firmware provided by the product's manufacturer. To the extent you wish to use such firmware, it is your responsibility to comply with the terms of any applicable license or other such agreement related to the download, installation, or use of the firmware. UrgentAutomation makes no representation that the version of the firmware that is installed on any product it sells is appropriate for your needs or use. Further, UrgentAutomation does not sell, re-sell, or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. To the extent any of the products sold by UrgentAutomation requires software for operation, you acknowledge that UrgentAutomation does not sell or license such software and that it is solely your responsibility to obtain the software or a proper license to use it from authorized sources. Read less
The GHCGFEP1030 is a single-pole molded case circuit breaker from Eaton/Cutler-Hammer/Westinghouse. The circuit breaker has a G frame size, and it is a GHC breaker in the Series C family of Westinghouse circuit breakers. The GHCGFEP1030 has its operating frequency capped at between 50 and 60 Hertz. Note that the GHCGFEP1030 is a complete breaker that is designed and manufactured purposely to be used in industrial applications. The circuit breaker uses a fixed thermal and a fixed magnetic type of trip unit to guard systems against short circuits, over-voltages, under-voltages, and other factors that may harm the components in a system.
The Cutler-Hammer GHCGFEP1030 has its current rating capped at 30 Amps. Additionally, the GHCGFEP1030 has a single pole and it is carefully manufactured to provide protection to an industrial system powered from a single-phase power source. The GHCGFEP1030 weighs 1.5 pounds and it has the Underwriters Laboratories (UL 489) certification. For the interrupt rating, the GHCGFEP1030 has a 14 Kilo Amperes Interrupt Capacity when installed in a system with an operating Voltage of 277 Volts AC. In addition to operating at 277 Volts AC, the GHCGFEP1030 has the power required to operate at 480 Volts AC, and when a DC power source is used, the GHCGFEP1030 can accommodate a voltage of between 125 Volts DC and 250 Volts DC. The Westinghouse GHCGFEP1030 has a non-interchangeable trip unit. Additionally, the GHCGFEP1030 features a 30 milliamps ground fault circuit protector. The circuit breaker has load side lug terminals. The GHCGFEP1030 has a maximum temperature rating of 40 degrees Celsius.