HJD3150

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.

Rated 4.8 with 12 reviews

UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More


HJD3150

Description: The Eaton HJD3150 Molded Case Circuit Breaker operates with 3 Poles and 150 Amps. The module has a J Frame and a 65 kAIC @ 480 Vac.

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.


Description: The Eaton HJD3150 Molded Case Circuit Breaker operates with 3 Poles and 150 Amps. The module has a J Frame and a 65 kAIC @ 480 Vac.


Rated 4.8 with 12 reviews







About HJD3150

The 3-pole Eaton HJD3150 is a circuit breaker with 150 Amps of current rating. It is an HJD type J frame breaker. The AC voltage specification of the HJD3150 is 600 Volts AC. The DC voltage specification of the HJD3150 is 250 Volts DC. The interrupt specifications of the HJD3150 are 100 and 65 kAIC at 240 and 480 Volts AC, respectively. Line and load terminals made of aluminum are provided with HJD3150. Either aluminum or copper wire with 25 to 185 square millimeters of cross sectional area should be used. Overheating the terminals on the circuit breaker can result in damage to the breaker and to random breaker tripping. To prevent this from occurring, a joint compound should be utilized when aluminum wires are used. The recommended torque value is 275 pounds on an inch. The trip module is an interchangeable thermal magnetic module. When a thermal trip occurs, the breaker cannot be reset until the thermal element has cooled sufficiently.

The nameplate data of the HJD3150 should be compared to the system requirements prior to installation. The internal accessories should be installed prior to installing the circuit breaker. The circuit breaker should also be checked for damage before mounting. Installation should only be performed by experienced staff. During installation, the HJD3150 should be powered off. The HJD3150 is a complete breaker with a molded case. It weighs 12.5 pounds and measures 4.13 x 4.13 x 4.06 inches. When the thread forming screws are removed and then reinstalled, they will try to reform the threads in the base. Therefore, care should be taken each time a thread forming screw is used to ensure that the screw moves in the original threads.


Technical specifications:


Part Number/Catalog No.HJD3150
Product TypeMolded Case Circuit Breaker
SeriesC
FrameJ
Poles3
Amps150 Amps
Interrupting Capacity22 kAIC at 250 Volts DC
Rating600 Volts AC
kAIC at 480 Volts AC65 kAIC
Dimensions (W x H x D)4.13 x 10 x 4.06 inches
Part Number/Catalog No.HJD3150
Product TypeMolded Case Circuit Breaker
SeriesC
FrameJ
Poles3
Amps150 Amps
Interrupting Capacity22 kAIC at 250 Volts DC
Rating600 Volts AC
kAIC at 480 Volts AC65 kAIC
Dimensions (W x H x D)4.13 x 10 x 4.06 inches
Common misspellings:
  • HJD3l50
  • HJD315o