JD2250F

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.

Rated 4.8 with 12 reviews

UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More


JD2250F

Description: The Eaton JD2250F Frame operates with 2 Poles and 250 Amps. The module has a J Frame and a 35 kAIC @ 480 Vac.

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.


Description: The Eaton JD2250F Frame operates with 2 Poles and 250 Amps. The module has a J Frame and a 35 kAIC @ 480 Vac.


Rated 4.8 with 12 reviews







About JD2250F

The Eaton JD2250F circuit breaker is a thermal magnetic circuit breaker that is manufactured by Eaton Cutler-Hammer. The Eaton Cutler-Hammer JD2250F circuit breaker is part of Series C of the Eaton JD Type thermal magnetic circuit breakers. The Cutler-Hammer JD2250F circuit breaker feature cable in/cable out accommodation, 2 poles, 250 Amps of current rating, 600 Volts AC and 250 Volts DC voltage ratings. The Cutler-Hammer JD2250F circuit breaker is contained in the J Frame type of enclosure. The keeper nut is mounted onto the line or load conductor of the Cutler-Hammer JD2250F circuit breaker and it is used as a threaded adapter; for the conductor to allow a bolt-on connector.

The Cutler-Hammer JD2250F circuit breaker is equipped with a plug nut meant for applications where screw-connected ring-type terminals are required to connect cables to the Cutler-Hammer JD2250F circuit breaker conductors. The under-voltage release mechanism controls the typical line voltage and it trips the Cutler-Hammer JD2250F circuit breaker when the voltage falls to between 35 and 70% of the solenoid coil rating. The users should note that the Cutler-Hammer JD2250F circuit breaker contacts will not close when the pickup voltage applied to the under-voltage release mechanism is lower. The users should not use the under-voltage release mechanism components like the circuit interlocks. A 24-point terminal block can be mounted on the right side of the Cutler-Hammer JD2250F circuit breaker for accommodating interior accessories. The auxiliary switch provides the circuit breaker contact with status information by monitoring the position of the molded crossbar that contains the moving contact arms.


Technical specifications:


Part Number/Catalog No.JD2250F
Product TypeFrame
SeriesC
FrameJ
Poles2
Amps250 Amps
Interrupting Capacity65 kAIC at 240 Volts AC
Rating600 Volts AC
kAIC at 480 Volts AC35 kAIC
Dimensions (W x H x D)4.13 x 10 x 4.06 inches
Part Number/Catalog No.JD2250F
Product TypeFrame
SeriesC
FrameJ
Poles2
Amps250 Amps
Interrupting Capacity65 kAIC at 240 Volts AC
Rating600 Volts AC
kAIC at 480 Volts AC35 kAIC
Dimensions (W x H x D)4.13 x 10 x 4.06 inches
Common misspellings:
  • JD225oF