UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More
Some of the products sold by UrgentAutomation may come with firmware installed on them. UrgentAutomation makes no representation as to your ability or right to download, obtain, or use any firmware provided by the product's manufacturer. To the extent you wish to use such firmware, it is your responsibility to comply with the terms of any applicable license or other such agreement related to the download, installation, or use of the firmware. UrgentAutomation makes no representation that the version of the firmware that is installed on any product it sells is appropriate for your needs or use. Further, UrgentAutomation does not sell, re-sell, or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. To the extent any of the products sold by UrgentAutomation requires software for operation, you acknowledge that UrgentAutomation does not sell or license such software and that it is solely your responsibility to obtain the software or a proper license to use it from authorized sources. Read less
The Eaton Cutler-Hammer JDB3250W Molded Case Circuit Breaker is a factory-assembled Frame F circuit breaker with a protective molded case and non-adjustable trip elements. This circuit breaker is used in a variety of low-voltage distribution applications for fast-acting protection against circuit overloading and against short circuits. This type of circuit breaker comes without line or load terminals, which must be ordered separately, and it has a 3-pole design that is suitable for both 1-phase and 3-phase applications. It is HACR rated for use in air-conditioning, refrigerating, and heating applications, and it is also designed for use in reverse feed wiring configurations.
The JDB3250W Molded Case Circuit Breaker has a continuous current rating of 250 Amps that is suitable for 600 Volts AC/250 Volts DC applications, and it offers a maximum interrupting rating of 35 kAIC. It comprises a non-interchangeable trip unit, an operating mechanism, and a frame. It is a temperature-sensitive device, and it is rated for use at a temperature below 40 degrees Celsius, and above this limit, it will carry a load below the nominal rating and therefore it must be calibrated for use at higher ambient temperatures. The JDB3250W is designed for use at 0 to 95% non-condensing relative humidity, and it can be used at an altitude of up to 1829 meters without de-rating. The JDB3250W is designed to meet the IEC, UL, BS, and AS standards, and it has approximate dimensions of 105 x 254 x 104 millimeters, with a net weight of 5.7 kilograms.