JDC3125

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.

Rated 4.7 with 17 reviews

UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More


JDC3125

Description: The Eaton JDC3125 Molded Case Circuit Breaker operates with 3 Poles and 125 Amps. The module has a J Frame and a 100 kAIC @ 480 Vac.

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.


Description: The Eaton JDC3125 Molded Case Circuit Breaker operates with 3 Poles and 125 Amps. The module has a J Frame and a 100 kAIC @ 480 Vac.


Rated 4.7 with 17 reviews







About JDC3125

The Eaton Corporation JDC3125 is a UL-certified and 125 Amps rated circuit breaker. It is a JDC type of circuit breaker with a J Frame. The JDC3125’s voltage specifications are 600 Volts AC or 250 Volts DC. The interrupt ratings for the JDC3125 are 100 kAIC at 480 Volts AC and 200 kAIC at 240 Volts AC. The J-frame JDC3125 has 14.25 pounds of weight. Its dimensions are 4.13 x 4.13 x 4.06 inches. JDC type circuit breakers are rated at a maximum of 250 Amps of current and 600 Volts AC operating power. The complete JDC3125 is provided with an integrated and replaceable trip unit which is a thermal magnetic unit. It is a 3-pole breaker and it also includes load and line terminals. The terminals are all made from aluminum.

To reduce the risk of breaker damage and tripping due to overheating terminals, an appropriate type of joint compound is highly recommended to be used when aluminum wires and conductors are used for terminations on the breaker terminals. The JDC3125 is installed in high-voltage and high-current systems. Therefore, to minimize the risk of injury or death, in addition to following the generally accepted safety procedures, the JDC3125 should always be installed by trained technical personnel. Furthermore, the JDC3125 should always be switched off during installation and also during maintenance. The installation process comprises circuit breaker inspection, the mounting of the breaker, the attachment of line and load terminals, the torquing of the terminals, and finally the attachment of the load and line wires. Prior to installation, the suitability of breaker to the system requirements should be verified.


Technical specifications:


Part Number/Catalog No.JDC3125
Product TypeMolded Case Circuit Breaker
SeriesC
FrameJ
Poles3
Amps125 Amps
Interrupting Capacity22 kA at 250 Volts DC
Rating600 Volts AC
kAIC at 480 Volts AC100 kAIC
Dimensions (W x H x D)4.13 x 10 x 4.06 inches
Part Number/Catalog No.JDC3125
Product TypeMolded Case Circuit Breaker
SeriesC
FrameJ
Poles3
Amps125 Amps
Interrupting Capacity22 kA at 250 Volts DC
Rating600 Volts AC
kAIC at 480 Volts AC100 kAIC
Dimensions (W x H x D)4.13 x 10 x 4.06 inches
Common misspellings:
  • JDC3l25