KDB3225W

Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.

Product comes with Urgent Automation's 1-year warranty.

Rated 4.5 with 8 reviews

Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


KDB3225W

Description: The KDB3225W Molded Case Circuit Breaker operates with 3 Poles and 225 Amps. The Thermal-Magnetic Molded Case Circuit Breaker is in the C Series and has a 11.5 lbs Weight.

Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.

Product comes with Urgent Automation's 1-year warranty.


Description: The KDB3225W Molded Case Circuit Breaker operates with 3 Poles and 225 Amps. The Thermal-Magnetic Molded Case Circuit Breaker is in the C Series and has a 11.5 lbs Weight.


Rated 4.5 with 8 reviews







About KDB3225W

The Eaton Cutler-Hammer KDB3225W Thermal-Magnetic Circuit Breaker is a complete factory-assembled circuit breaker with a non-interchangeable trip unit, used for circuit protection in a wide range of low-voltage applications. It is designed with a 3-pole wiring configuration, used for 3-phase and single-phase applications, and it has a trip unit designed to be adjusted by experienced personnel.  The KDB3225W has a current rating of 225 Amps, suitable for 600 Volts AC grounded and ungrounded system, and it offers an interrupting rating of 35 Kilo Amps Interrupting Capacity (kAIC). The KDB3225W circuit breaker is rated for HACR and reverse feed use, which offers fast and cheap trip protection to the users’ connected devices. 

It comprises a non-adjustable trip unit, a frame, and a trip-free operating mechanism. The trip unit consists of a thermal and magnetic trip element which provides magnetic and thermal trip action in the event of short-circuiting. Its operating mechanism is of a “quick make and break” design, which provides a means of easily operating the breaker’s contact, and it also indicates the status of the breaker, showing whether it is on, off, or tripped. The KDB3225W is designed to operate below a temperature of 40 degree Celsius, and the carrying will de-rate below the nominal rating if the temperature is higher, and the breaker needs to be re-calibrated for a higher temperature. It is also designed to function properly within a relative humidity range of 0 to 95%, and it can be used at height of up to 6000 feet above sea level. The KDB3225W has an aggregate shipping dimension of 5.5 x 10.13 x 4.1 inches (width x height x depth), and it has a net weight of 11.5 pounds (including the frame and trip unit).


Technical specifications:


Part Number/Catalog No.KDB3225W
Product TypeMolded Case Circuit Breaker
SeriesC
FrameK
Poles3
Amps225 Amps
Unit TypeThermal-Magnetic
Interrupting Capacity65 kA at 240 Volts AC
Dimensions (W x H x D)5.5 x 10.13 x 4.1 inches
Weight11.5 pounds
Part Number/Catalog No.KDB3225W
Product TypeMolded Case Circuit Breaker
SeriesC
FrameK
Poles3
Amps225 Amps
Unit TypeThermal-Magnetic
Interrupting Capacity65 kA at 240 Volts AC
Dimensions (W x H x D)5.5 x 10.13 x 4.1 inches
Weight11.5 pounds
Common misspellings:
  • KD83225W