Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The CLDC3600T52W from the Eaton Corporation is a CLDC type of electronic circuit breaker. It is suitable for use at 100% of the frame rating. The CLDC3600T52W is a 3-pole breaker with 250 Volts DC and 600 Volts AC voltage ratings and with 600 Amps of current rating. It is rated at 50 or 60 Hertz. The interrupt ratings for the CLDC3600T52W are 100 kAIC at 480 Volts AC and 200 kAIC at 240 Volts AC. The CLDC3600T52W must be used with 90 degrees Celsius insulated wire and AL9CU terminals. The circuit breaker must be housed in an enclosure with the following dimensions: a height of 24 inches, a width of 15 inches, and a depth of 6 inches. Ventilation space around the CLDC3600T52W is required, specifically 8 square inches of space on the top front side and 8 square inches of space on the bottom front side.
The L-frame CLDC3600T52W includes an integrated trip module which is the OPTIM 550. Terminals need to be ordered separately because the CLDC3600T52W is not supplied with terminals. The CLDC3600T52W weighs 17 pounds and it has dimensions of 8.25 x 8.25 x 8.25 inches. Contact with energized high voltage equipment can lead to injury (including shock and burns) and even death. Extreme care is advised with the handling of the CLDC3600T52W. To ensure the safety of the personnel and equipment, all electrical equipment, including the CLDC3600T52W, must be de-energized during maintenance and installation. The work area must be cleared of voltage. Compliance with all local safety codes and regulations should also be ensured during the maintenance and installation activities. For long-term trouble-free operation and performance according to all the specifications, periodic inspection of the CLDC3600T52W is recommended.
| Part Number/Catalog No. | CLDC3600T52W |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | L |
| Poles | 3 |
| Amps | 600 Amps |
| Interrupting Capacity | 200 kAIC at 240 Volts AC |
| Unit Type | OPTIM |
| Dimensions (W x H x D) | 8.25 x 10.75 x 4.06 inches |
| Weight | 20 pounds |
| Part Number/Catalog No. | CLDC3600T52W |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | L |
| Poles | 3 |
| Amps | 600 Amps |
| Interrupting Capacity | 200 kAIC at 240 Volts AC |
| Unit Type | OPTIM |
| Dimensions (W x H x D) | 8.25 x 10.75 x 4.06 inches |
| Weight | 20 pounds |