HLD2500

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.

Rated 4.8 with 11 reviews

UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More


HLD2500

Description: The Eaton HLD2500 Molded Case Circuit Breaker operates with 2 Poles and 500 Amps. The module has a L Frame and a Thermal-Magnetic Unit Type.

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.


Description: The Eaton HLD2500 Molded Case Circuit Breaker operates with 2 Poles and 500 Amps. The module has a L Frame and a Thermal-Magnetic Unit Type.


Rated 4.8 with 11 reviews







About HLD2500

The 2-pole Eaton HLD2500 is a Series C circuit breaker with a built-in thermal–magnetic trip module. The trip module is non-interchangeable. The HLD2500 is an HLD type breaker with an L Frame. The HLD circuit breakers are rated for 600 Volts AC and support either thermal-magnetic or electronic trip units. The current specifications for the HLD2500 are 500 Amps and its voltage specifications are 250 Volts DC and 600 Volts AC. The interrupt capacity ratings for the breaker are 100 kAIC at 240 Volts AC and 65 kAIC at 480 Volts AC. The HLD2500 is specified for 50 and 60 Hertz frequencies. The aluminum line and load terminals are part of the HLD2500. Terminal overheating which leads to breaker damage and to spurious tripping can occur when aluminum wires are used. 

The Eaton Corporation recommends using a joint solution when aluminum conductors or wires are used with the circuit breaker because this will prevent the terminal from overheating. A high-voltage and high-current device such as the HLD2500 requires that the personnel involved in installing it or servicing it take certain precautions to ensure that they are safe from injury. The manufacturer recommendations regarding the HLD2500 include ensuring that the breaker is in the off state while it is being installed, serviced, or inspected, ensuring that the working area is clear of high voltages and that all other associated equipment is powered off. The HLD2500 comes in an L Frame. The breaker weighs 19 pounds. The dimensions of the circuit breaker enclosure are 13.1 x 10.2 x 10.2 inches.


Technical specifications:


Part Number/Catalog No.HLD2500
Product TypeMolded Case Circuit Breaker
SeriesC
FrameL
Poles2
Amps500
Interrupting Capacity100 kAIC at 240 Volts AC
Unit TypeThermal-Magnetic
Dimensions (W x H x D)8.25 x 10.75 x 4.06 inches
Weight18 pounds
Part Number/Catalog No.HLD2500
Product TypeMolded Case Circuit Breaker
SeriesC
FrameL
Poles2
Amps500
Interrupting Capacity100 kAIC at 240 Volts AC
Unit TypeThermal-Magnetic
Dimensions (W x H x D)8.25 x 10.75 x 4.06 inches
Weight18 pounds
Common misspellings:
  • H1D2500
  • HLD25o0
  • HLD250o