UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More
Some of the products sold by UrgentAutomation may come with firmware installed on them. UrgentAutomation makes no representation as to your ability or right to download, obtain, or use any firmware provided by the product's manufacturer. To the extent you wish to use such firmware, it is your responsibility to comply with the terms of any applicable license or other such agreement related to the download, installation, or use of the firmware. UrgentAutomation makes no representation that the version of the firmware that is installed on any product it sells is appropriate for your needs or use. Further, UrgentAutomation does not sell, re-sell, or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. To the extent any of the products sold by UrgentAutomation requires software for operation, you acknowledge that UrgentAutomation does not sell or license such software and that it is solely your responsibility to obtain the software or a proper license to use it from authorized sources. Read less
The Eaton Cutler-Hammer LDB3500W Molded Case Circuit Breaker is a thermal magnetic circuit breaker in the Frame L, Series C family of Eaton general-purpose circuit breakers with molded casing and non-adjustable trip units. This device is used for short circuit protection and overload protection in a variety of low-voltage systems, and it is HACR rated and CE marked for use in a variety of industrial settings. The LDB3500W has a continuous current rating of 500 Amps, with a maximum interrupt rating of 35 KAIC, and it is suitable for reverse feed use. It is assembled without line or load terminals, and it comes with a 3-pole design that is designated for either single or 3-phase use. It has an insulated frame, with a non-adjustable trip unit, and an operating mechanism.
The trip unit provides instantaneous magnetic and thermal trip actions, and these are achieved by using electromagnets in series with the current load, and a bimetal strip which deflects upon detecting a prolonged current overload. The LDB3500W has a trip-free operating mechanism that is the quick make or break type, which provides a means of operating the breaker’s contacts, which indicates whether the breaker is on, off, or tripped, and which prevents the contacts from closing in the event of an abnormal current condition. It has an ambient operating limit of 40 degrees Celsius (104 degrees Fahrenheit), and it operates within a 0 to 95% non-condensing relative humidity range. The LDB3500W has an average weight of 20.0 pounds (excluding the terminals), with net shipping dimensions of 8.25 x 10.75 x 4.06 inches, and it is CE, CSA, and UL certified.