LT2500T

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.

Rated 5 with 6 reviews

UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More


LT2500T

Description: The Eaton LT2500T Trip Unit operates with 2 Poles and 500 Amps. The module has a L Frame and a Thermal-Magnetic Unit Type.

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.


Description: The Eaton LT2500T Trip Unit operates with 2 Poles and 500 Amps. The module has a L Frame and a Thermal-Magnetic Unit Type.


Rated 5 with 6 reviews







About LT2500T

The Eaton LT2500T is an LT type electronic molded case trip unit for the L-frame Series C circuit breakers. The LT2500T has a 500 Amps current rating. It is a 2-pole device with a fixed thermal and magnetic tripping module. The magnetic trip current range is 2500 to 5000 Amps. The circuit breaker is tripped within 2 hours by a thermal element in the event of a 135% overload and it is tripped in less time for higher overloads. The circuit breaker is tripped by the magnetic element for all the currents that exceed the magnetic setting. The LT2500T is calibrated at 40 degrees Celsius and 50 to 60 Hertz frequency. The cover of the trip unit is sealed at the factory to prevent possible tampering with the calibration. The manufacturer should be consulted regarding the de-rating of the device in other ambient conditions and at other frequencies.
 
The installation and the maintenance procedures of the LT2500T should only be undertaken when it is powered off. Failure to do switch the power off could lead to substantial equipment damage, and to serious injury and even death to the users. In addition to ensuring that no voltage is present during installation or maintenance, all general and local safety laws and protocols should be followed. During the installation of the LT2500T in a circuit breaker, the breaker should be in the off or the tripped state. Several accessories are available for the L-frame LT2500T, including a shunt trip, low energy shunt trip, alarm or lockout switch, undervoltage release mechanism, and an auxiliary switch. it is recommended to install the internal accessories before mounting and connecting the circuit breaker.


Technical specifications:


Part Number/Catalog No.LT2500T
Product TypeTrip Unit
SeriesC
FrameL
Poles2
Amps500 Amps
Interrupting FramesStandard, High, or Ultra High
Unit TypeThermal-Magnetic
Dimensions (W x H x D)8.25 x 10.75 x 4.06 inches
Weight3 pounds
Part Number/Catalog No.LT2500T
Product TypeTrip Unit
SeriesC
FrameL
Poles2
Amps500 Amps
Interrupting FramesStandard, High, or Ultra High
Unit TypeThermal-Magnetic
Dimensions (W x H x D)8.25 x 10.75 x 4.06 inches
Weight3 pounds
Common misspellings:
  • 1T2500T
  • LT25o0T
  • LT250oT