LT2600T

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.

Rated 4.6 with 15 reviews

UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More


LT2600T

Description: The Eaton LT2600T Trip Unit operates with 2 Poles and 600 Amps. The module has a L Frame and a Thermal-Magnetic Unit Type.

Preowned

Includes a 1-Year UrgentAutomation warranty.

UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.


Description: The Eaton LT2600T Trip Unit operates with 2 Poles and 600 Amps. The module has a L Frame and a Thermal-Magnetic Unit Type.


Rated 4.6 with 15 reviews







About LT2600T

The LT-type LT2600T circuit breaker from Eaton is a trip unit for L-frame circuit breakers. It has 2 poles, it is rated for 600 Amps of current, and it is based on a non-interchangeable thermal-magnetic tripping system. The magnetic trip current range for the LT2600T runs from 5000 Amps to 6000 Amps. The magnetic trip on every pole can be adjusted by changing the position of the adjustment button. Currents exceeding the magnetic trip setting will cause instant tripping. Tripping due to thermal events occurs within 2 hours of a 135% overload and it occurs earlier for higher overloads. The LT2600T is UL certified. During its installation in a Series C breaker with an L-frame, the LT2600T should be powered off.

Local codes and regulations and all the relevant industry safety procedures should be followed during installation of the circuit breaker. The LT2600T is factory calibrated and then sealed to reduce the risk of calibration tampering. Calibration is conducted at 50 to 60 Hertz frequency and at 104 degrees Fahrenheit. The specifications of the LT2600T should be compared to the system requirements and the equipment ratings before it is installed inside a circuit breaker. During installation inside of a breaker, the torque on the screws should be kept within the prescribed limits. Excessive torque will cause shearing for the screws but torque levels that are less than required will lead to overheating and this will cause random breaker tripping. Accessories for the LT2600T include an auxiliary switch, shunt trip, and a low-power shunt trip. The accessories are usually installed prior to the circuit breaker’s mounting and installation.


Technical specifications:


Part Number/Catalog No.LT2600T
Product TypeTrip Unit
SeriesC
FrameL
Poles2
Amps600 Amps
Interrupting FramesStandard, High, or Ultra High
Unit TypeThermal-Magnetic
Dimensions (W x H x D)8.25 x 10.75 x 4.06 inches
Weight3 pounds
Part Number/Catalog No.LT2600T
Product TypeTrip Unit
SeriesC
FrameL
Poles2
Amps600 Amps
Interrupting FramesStandard, High, or Ultra High
Unit TypeThermal-Magnetic
Dimensions (W x H x D)8.25 x 10.75 x 4.06 inches
Weight3 pounds
Common misspellings:
  • 1T2600T
  • LT26o0T
  • LT260oT