Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The Eaton Cutler-Hammer JGS3175FAG Series G Thermal-Magnetic Circuit Breaker is a factory-assembled Frame JG circuit breaker with a fixed thermal trip unit and an adjustable magnetic trip unit. It is used for protecting conductors and connected electrical appliances from short-circuits and line current overloads. It provides instantaneous trip action by using the magnetic trip unit which is field-adjustable at up to 10 times the nominal breaker rating in order to suit a wide range of applications, and like all Series G breakers, it has internal accessories and components which are field installable for enhanced performance. The JGS3175FAG has a continuous current rating of 175 Amps, and it is suitable for applications with a maximum line voltage of 600 Volts AC or 250 Volts DC. It has interrupting capacities of 35 kAIC at 480 Volts AC and 85 kAIC at 240 Volts AC, and it can be used to protect appliances like motors and motor starters.
The JGS3175FAG has load and line side pressure terminals, with a multi-wire connector that is used for distributing a load to multiple connected devices without the use of separate distribution terminal blocks, and it has metric rated mounting hardware for easy field installation. It has a fixed thermal trip unit made of a current heated bimetal strip which provides trip action in the event of a prolonged overload, and it also has an adjustable magnetic trip unit which provides instantaneous trip action if the circuit current exceeds the designated value. The JGS3175FAG has is pre-calibrated for use at an ambient limit of 40 degrees Celsius (104 degrees Fahrenheit), and within this ambient temperature limit, it is 80% rated. The JGS3175FAG has an approximate weight of 2.7 kilograms and has net shipping dimensions of 104.9 x 177.8 x 90.7 millimeters.
| Part Number/Catalog No. | JGS3175FAG |
| Product Type | Molded Case Circuit Breaker |
| Frame | JG |
| Interrupting Capacity | 35 kAIC at 480 Volts AC |
| Pole(s) | 3 |
| Amps | 175 Amps |
| Trip Unit | Fixed Adjustment |
| Terminations | Line/Load Standard |
| Rating | 80% |
| Maximum Rated Current | 250 Amps |
| Auxiliary Circuits | 690 Volts AC |
| Main Conducting Paths | 8 kV |
| Maximum Switching Frequency | 240 1/h |
| Weight | 6 pounds |
| Dimensions (W x H x D) | 4.3 x 7 x 3.57 inches |
| Part Number/Catalog No. | JGS3175FAG |
| Product Type | Molded Case Circuit Breaker |
| Frame | JG |
| Interrupting Capacity | 35 kAIC at 480 Volts AC |
| Pole(s) | 3 |
| Amps | 175 Amps |
| Trip Unit | Fixed Adjustment |
| Terminations | Line/Load Standard |
| Rating | 80% |
| Maximum Rated Current | 250 Amps |
| Auxiliary Circuits | 690 Volts AC |
| Main Conducting Paths | 8 kV |
| Maximum Switching Frequency | 240 1/h |
| Weight | 6 pounds |
| Dimensions (W x H x D) | 4.3 x 7 x 3.57 inches |