
Preowned
Includes a 1-Year UrgentAutomation warranty.
UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.
UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More
Some of the products sold by UrgentAutomation may come with firmware installed on them. UrgentAutomation makes no representation as to your ability or right to download, obtain, or use any firmware provided by the product's manufacturer. To the extent you wish to use such firmware, it is your responsibility to comply with the terms of any applicable license or other such agreement related to the download, installation, or use of the firmware. UrgentAutomation makes no representation that the version of the firmware that is installed on any product it sells is appropriate for your needs or use. Further, UrgentAutomation does not sell, re-sell, or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. To the extent any of the products sold by UrgentAutomation requires software for operation, you acknowledge that UrgentAutomation does not sell or license such software and that it is solely your responsibility to obtain the software or a proper license to use it from authorized sources. Read less
Preowned
Includes a 1-Year UrgentAutomation warranty.
UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.
The Eaton Cutler-Hammer NGC308032E Molded Case Circuit Breaker is a completely assembled Frame NG circuit breaker with a digital trip unit used for enhanced and accurate overload protection in a variety of applications with high standard and coordination need requirements. It has an electronic trip unit with microprocessor-based RMS current sensing for proper correlation with the thermal characteristics of conductors and equipment, and it has an over-temperature protective feature, which provides added protection in the event that the operating temperature rises above the designated value. The NGC308032E has a current rating of 800 Amps, with a current interrupting limit of 100 kAIC at 480 Volts, and it has a UL-rated line voltage of 600 Volts AC across its terminals. It features the state-of-the-art high-speed blow open contact which keeps the contact from closing in the event of an abnormal circuit condition by using electromechanical force, and it has a hand toggle operating mechanism which indicates the breaker’s position. It has 6 function current settings that are adjustable via a front-mounted switch, and it has a 3-pole wire design with a trip element and trip bar on each pole.
The NGC308032E has a load and line end imperial tapped terminal option made of copper/aluminum conductors, and it is supplied with imperial mounting hardware for easy installation. It features ground fault long-time and short-time pickup setting, and an instantaneous override switch with a rating just below the breaker’s nominal rating for additional protection. The NGC308032E has an average long delay time of 15 seconds, with 0 to 100 milliseconds of short delay time, and it has a thermal memory capable of remembering the timing sequence of recent abnormal circuit conditions, and it is capable of imposing shorter delay timing on subsequent conditions. The NGC308032E has LED status indicators that cannot indicate the cause of faults, and it is shipped with a standard test kit for field testing. It has a standard 40 degrees Celsius calibrated temperature limit with a 100% rating, and it is used within a 0 to 95% non-condensing relative humidity range. It has an approximate mounting weight of 20.4 kilograms (45 pounds), with aggregate dimensions of 209.60 x 406.40 x 139.70 millimeters (8.3 x 16.0 x 5.5 inches) and it is UL, IEC, and CSA certified.
Part Number/Catalog No. | NGC308032E |
Product Type | Molded Case Circuit Breaker |
Frame | NG |
Interrupting Capacity | 100 kAIC at 480 Volts AC |
Poles | 3 |
Amps | 80 Amps |
Trip Unit | 310+ Electronic LSI |
Terminations | Imperial tapped line/load conductor |
Maximum Rated Current | 1200 Amps |
Main Conducting Paths | 750 Volts AC |
Maximum Switching Frequency | 60 1/h |
Rated Making Capacity | 20 Amps |
Maximum Opening Time | 62 milliseconds |
Rated Operational Voltage | 600 Volts AC |
Part Number/Catalog No. | NGC308032E |
Product Type | Molded Case Circuit Breaker |
Frame | NG |
Interrupting Capacity | 100 kAIC at 480 Volts AC |
Poles | 3 |
Amps | 80 Amps |
Trip Unit | 310+ Electronic LSI |
Terminations | Imperial tapped line/load conductor |
Maximum Rated Current | 1200 Amps |
Main Conducting Paths | 750 Volts AC |
Maximum Switching Frequency | 60 1/h |
Rated Making Capacity | 20 Amps |
Maximum Opening Time | 62 milliseconds |
Rated Operational Voltage | 600 Volts AC |