Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The 80% rated Eaton RGH316036E is a three-pole electronic molded case circuit breaker. This RG type breaker belongs to Series G and has an RG-frame. The RGH316036E includes a built-in electronic LSIG trip module (Digitrip 310 RMS). It is UL listed and is suitable for reverse feed applications. The nameplate data for the RGH316036E should be compared to system requirements before installation. To comply with UL standards, the internal accessories should be installed prior to installation. The RGH316036E should also be checked for damage before mounting. Installation should only be performed by experienced staff. During installation, the RGH316036E must be kept powered off. The current rating for the RGH316036E is 1600 Amps and it supports 50 and 60 Hertz frequencies and its interrupt ratings are 125, 65 and 50 kiloamps interrupting capacity at 240, 480 and 600 Volts AC, respectively.
Periodic maintenance and inspection of the RGH316036E are recommended to ensure long-term and trouble-free operation. The maintenance and inspection of this module should always be carried out while the breaker is switched off. Cleaning agents which do not damage the breaker should be used. Any grease, dirt, and moisture should be removed from the circuit breaker. The imperial tapped terminals and the connectors should be checked for looseness or indications of overheating. Any required field testing should be carried out as per applicable NEMA standard. The RGH316036E weighs approximately 102 pounds. Its dimensions are 9.75 by 15.5 by 15.5 inches.
| Part Number/Catalog No. | RGH316036E |
| Product Type | Molded Case Circuit Breaker |
| kAIC @ 480VAC | 65 |
| Amps | 1600 |
| Poles | 3 |
| Trip Unit | 310+ Electronic LSIG |
| Terminations | Imperial Tapped Line/Load Conductor |
| Max. Rated Current | 2500 A |
| Main Conducting Paths | 8 kV |
| Endurance | 3,000 Operating Cycles |
| Max. Switching Frequency | 60 1/h |
| Rated Making Capacity | 20 A |
| Rated Operational Voltage | 125/250 V |
| Power Consumption @ 24 Vac | 612 VA |
| Max. Opening Time | 62 ms |
| Part Number/Catalog No. | RGH316036E |
| Product Type | Molded Case Circuit Breaker |
| kAIC @ 480VAC | 65 |
| Amps | 1600 |
| Poles | 3 |
| Trip Unit | 310+ Electronic LSIG |
| Terminations | Imperial Tapped Line/Load Conductor |
| Max. Rated Current | 2500 A |
| Main Conducting Paths | 8 kV |
| Endurance | 3,000 Operating Cycles |
| Max. Switching Frequency | 60 1/h |
| Rated Making Capacity | 20 A |
| Rated Operational Voltage | 125/250 V |
| Power Consumption @ 24 Vac | 612 VA |
| Max. Opening Time | 62 ms |