Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The SVX100A1-4A1N1 is a Cutler-Hammer (a division of the Eaton Corporation) is an adjustable frequency AC drive. It belongs to manufacturer’s SVX9000 series. The AC drive can be supplied with 380 to 500 Volts AC 3-phase power at 50 to 60 Hertz frequency. The SVX100A1-4A1N1 is 100 Horsepower rated drive for 3-phase AC motors. Its current output ratings are 140 Amps (CT) and 170 Amps (VT). The module is enclosed in a NEMA 1 (IP21) rated housing. This kind of protection rating implies that this AC drive should be mounted in electrical cabinets with higher water and dust protection ratings. The Cutler-Hammer SVX100A1-4A1N1 can be controlled over an integrated alphanumeric keypad. It is used to set up the device and its working parameters.
This AC drive does not have a brake chopper circuit. In operating mode, the drive uses Volt/Hertz control or Sensorless Vector Control (SVC) for the smooth operation of 3-phase motors. For interaction with automation systems, it uses 2 analog inputs, 1 analog output, 6 digital inputs, 1 digital output, and 2 relay outputs. The Cutler-Hammer SVX100A1-4A1N1 housing has dimensions of 30.1 inches x 13.5 inches x 11.5 inches (765 millimeters x 343 millimeters x 292 millimeters). These dimensions correspond to the product’s FR8 frame rating. The product is shipped at a weight of 127 pounds (57.6 kilograms). The SVX100A1-4A1N1 is certified with the EN 61800-3, IEC 61800-2, and UL 508C standards. It should be mounted exclusively in the vertical position. The operating temperature range of the device is -10 to 50 degrees Celsius (14 to 122 degrees Fahrenheit). It can be stored at -40 to 70 degrees Celsius (-40 to 158 degrees Fahrenheit) temperatures.
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Part Number/Catalog No. | SVX100A1-4A1N1 |
| Product Type | Adjustable Frequency Drive |
| Product Family | Open Drives |
| Horsepower | 100 |
| AFD Software Series | Standard |
| Enclosure | NEMA Type 1 |
| Voltage | 480V |
| Kepyad Type | Alphanumeric |
| Input Option | 3-phase, EMC H |
| Brake Chopper Option | No Brake Chopper Circuit |
| Board Modifications | Standard Boards |
| Frame Size | FR8 |
| Supply Frequency | 50/60 Hz |
| Inputs | 2 Analog, 6 Digital |
| Outputs | 1 Analog, 1 Digital, 2 Relay |
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Part Number/Catalog No. | SVX100A1-4A1N1 |
| Product Type | Adjustable Frequency Drive |
| Product Family | Open Drives |
| Horsepower | 100 |
| AFD Software Series | Standard |
| Enclosure | NEMA Type 1 |
| Voltage | 480V |
| Kepyad Type | Alphanumeric |
| Input Option | 3-phase, EMC H |
| Brake Chopper Option | No Brake Chopper Circuit |
| Board Modifications | Standard Boards |
| Frame Size | FR8 |
| Supply Frequency | 50/60 Hz |
| Inputs | 2 Analog, 6 Digital |
| Outputs | 1 Analog, 1 Digital, 2 Relay |