Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The W200M4CFC Cutler Hammer is a NEMA Contactor/Starter Eaton Drive. It belongs to the W200 series and has a motor voltage of 200 with a maximum hp of 1. Its enclosure must be size 1 and its coil voltage is around 120. With around 60 Hertz, this module is a 3-Phase unit with 3 poles.
The W200M4CFC is a non-reversive motor starter that has been designed by Eaton Corporation under its Cutler-Hammer division. The Eaton Cutler-Hammer W200M4CFC non-reversive motor starter has a NEMA 4 frame and it belongs to the NEMA Advantage series of Eaton Cutler-Hammer controllers. It combines a voltage of 120 Volts, a frequency of 60 Hertz, and a continuous amperage rating of 135 Amps. The Eaton Cutler-Hammer W200M4CFC non-reversive motor starter provides a small and compact design with a height of 203.2 millimeters, a width of 93.5 millimeters, and a depth of 166.1 millimeters. It has a shipping weight of 6 pounds. The Eaton Cutler-Hammer W200M4CFC non-reversive motor starter comes with an open enclosure that protects the essential wiring of the drive and prevents the users from coming into contact with the most hazardous parts. This controller can operate at a maximum altitude of 2000 meters and at a maximum temperature of 40 degrees Celsius.
When it comes to the communication features, the Eaton Cutler-Hammer W200M4CFC non-reversive motor starter can be connected to a DeviceNet communication module that enables the drive to send and receive data. This data transfer process can be managed by the Eaton Cutler-Hammer central monitoring unit. The Eaton Cutler-Hammer W200M4CFC non-reversive motor starter comes with different push buttons, including an emergency stop button and a reset button, and several status indicators that show the current status of the drive and different functions such as the forward, reverse, and stop buttons. The Eaton Cutler-Hammer W200M4CFC non-reversive motor starter can be used with 3-phase motors that need a non-reversive function. Motors that range from 200 to 575 Volts in voltage are able to be used with this controller.
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |