UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More
Some of the products sold by UrgentAutomation may come with firmware installed on them. UrgentAutomation makes no representation as to your ability or right to download, obtain, or use any firmware provided by the product's manufacturer. To the extent you wish to use such firmware, it is your responsibility to comply with the terms of any applicable license or other such agreement related to the download, installation, or use of the firmware. UrgentAutomation makes no representation that the version of the firmware that is installed on any product it sells is appropriate for your needs or use. Further, UrgentAutomation does not sell, re-sell, or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. To the extent any of the products sold by UrgentAutomation requires software for operation, you acknowledge that UrgentAutomation does not sell or license such software and that it is solely your responsibility to obtain the software or a proper license to use it from authorized sources. Read less
The Allen-Bradley W201K2CF Non-reversing Contactor Type operates with 200V and 10 Hp max.. It also has 45 Continuous Amps and a 120/60 Coil Voltage (Hz/V).
The W201K2CF contactor is a none-reversing W201 contactor designed and engineered by Eaton Cutler-Hammer. The W201K2CF contactor features a power voltage rating of 200 Volts AC and it has a maximum Horsepower rating of 10 Horsepower. The W201K2CF contactor is an open type of FVNR contactor, that features a significantly smaller contact bounce in the regulated power sent to the coil than other contactors have. This feature ensures the elimination of coil burnout. With a small size, the W201K2CF contactor uses smaller enclosures and control panel boxes than most contactors. The unit comes with the solid-state overload relay with the standard protection features including the phase loss and unbalance protection and a selectable trip class. The W201K2CF contactor features low-cost communication capabilities. The unit comes with the ON/OFF commands, and the status and the motor data are able to be linked to the automated control systems. Because it is a microprocessor-based contactor, the W201K2CF contactor does not close on low control voltage, and the armature closing speed is easily controlled to minimize the contact bounce.
With optimized coil power, the W201K2CF contactor provides a high level of contact force despite a small physical size. The high contact force ensures an extended electrical life. For minimized generation of heat, the unit uses current sensors instead of heaters. This ensures that the temperature rise in the overload relay is effectively eliminated. Therefore, the low level of coil holding power ensures that there is reduced heating in the magnet coil. The W201K2CF contactor features the Advantage Control modules that provide a cost-effective alternative to pushbuttons. It comes with the selector switches and indicating lights with a reset mechanism and panel meters. This simple plug-in unit ensures that there is minimal installation effort.