
Preowned
Includes a 1-Year UrgentAutomation warranty.
UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.
UrgentAutomation sells surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with UrgentAutomation and not the manufacturer. UrgentAutomation is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Read More
Some of the products sold by UrgentAutomation may come with firmware installed on them. UrgentAutomation makes no representation as to your ability or right to download, obtain, or use any firmware provided by the product's manufacturer. To the extent you wish to use such firmware, it is your responsibility to comply with the terms of any applicable license or other such agreement related to the download, installation, or use of the firmware. UrgentAutomation makes no representation that the version of the firmware that is installed on any product it sells is appropriate for your needs or use. Further, UrgentAutomation does not sell, re-sell, or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. To the extent any of the products sold by UrgentAutomation requires software for operation, you acknowledge that UrgentAutomation does not sell or license such software and that it is solely your responsibility to obtain the software or a proper license to use it from authorized sources. Read less
Preowned
Includes a 1-Year UrgentAutomation warranty.
UrgentAutomation is not an authorized distributor for Eaton Cutler-Hammer.
The Eaton S801U36N3S Non-combination Open Soft Starter operates with 360 Amps and a 47-63 Hz Operating Frequency. It has 3 Poles and No option.
The Eaton Cutler-Hammer S801U36N3S non-combination soft starter is an industrial multifunction reduced voltage soft starter form the S801 series of soft starters that are designed to start, ramp up, and stop 3-phase motors. This starter features a very compact design that allows for easy and simple field retrofitting, and it also features built-in overload protection, programmable overload settings, and built-in run bypass contactors for the control of the inrush current and reduction of the wear on belts, gears, chains, clutches, shafts, and bearings. The S801U36N3S soft starter has a 3-phase operational voltage range of 200 to 600 Volts AC at 47 to 63 Hertz frequency and a maximum current capacity of 360 Amps. It has a standard duty Horsepower rating of 125 Horsepower at 60 Hertz, and a standard ramp time range of 0.5 seconds to 180 seconds.
The S801U36N3S soft starter has an average bypass time of 10 minutes, with 660 Volts AC rated insulation voltage and an overload setting range between 30% and 100% of the full current. All S801 non-combination soft starters, including the S801U36N3S soft starter, come with 24 Volts DC control voltage that helps to enhance user and equipment safety, and they have 1 relay contact with a 240 Volts AC contactor rating. The S801U36N3S soft starter has a control interface module that allows for easy configuration, which reduces the commissioning time. It has 3-pole wiring and it requires lead add-on lugs for easy field wiring and installation processes. The S801U36N3S soft starter has an operating temperature range of -30 to 50 degrees Celsius, and a storage temperature range between -50 and 70 degrees Celsius. The S801U36N3S soft starter has total mounting dimensions of 196.3 x 323.1 x 179.9 millimeters (W x H x D), and an approximate weight of 21.8 kilograms.
Manufacturer | Eaton Cutler-Hammer |
Brand | Eaton Cutler-Hammer |
Part Number | S801U36N3S |
Product Type | Open Soft Starter |
Series | S801 |
Soft Starter Type | Non-combination |
Amps | 360 |
Option | No |
Poles | 3 |
Type | Standard |
Operating Frequency | 47-63 Hz |
Insulating voltage (Ui) | 660V |
Bypass mechanical lifespan | 10M |
Voltage AC | 240 max. |
Voltage DC | 120 max. |
Manufacturer | Eaton Cutler-Hammer |
Brand | Eaton Cutler-Hammer |
Part Number | S801U36N3S |
Product Type | Open Soft Starter |
Series | S801 |
Soft Starter Type | Non-combination |
Amps | 360 |
Option | No |
Poles | 3 |
Type | Standard |
Operating Frequency | 47-63 Hz |
Insulating voltage (Ui) | 660V |
Bypass mechanical lifespan | 10M |
Voltage AC | 240 max. |
Voltage DC | 120 max. |